What did you do to your mini today?
I started to machine parts for my spare wheel projects . . . more here: https://www.northamericanmotoring.co...ml#post4087097
Mother's Back to Black on the lower plastic and side mirrors. Looks amazing now. I didn't realize how faded it had gotten. I'll have to do the roof line next.
Also installed a new hood scoop grill from MiniFini.
Before/After:


I like how it looks with the new intercooler showing through the lower grill.
Also installed a new hood scoop grill from MiniFini.
Before/After:


I like how it looks with the new intercooler showing through the lower grill.
Did you just have a stock sway before or the 18mm? I am looking to do the same and would like to know how the ride has changed??
wet scrubbed all carpets, wet vac after it. 10 years of dirt the normal vac didn't get out, and the pedals all shiny again. While at it, put in LED in dome light and glove box that were supposed to be over the rear license plate but don't work in that position (needs a resistor there - gotta order more expensive kit there).
Does this have a lot more storage room than the factory one? Mine barely holds anything but a pocket knife and a few sets of keys, and, they all RATTLE like crazy in there so I decided to just leave it empty. Where did you get yours?
Does this have a lot more storage room than the factory one? Mine barely holds anything but a pocket knife and a few sets of keys, and, they all RATTLE like crazy in there so I decided to just leave it empty. Where did you get yours?
It comes with a rubber pad so stuff inside doesn't slide around too much. The compartment is not seriously big, but it will hold sunglasses, smartphone and keys or a garage door remote -- the kinds of things that would normally be rattling around in the cup holders.
FlipTop Center Armrest Console - Black 52160429935
http://www.ecstuning.com/Search/SiteSearch/52160429935/


Its a pretty nice option if you dont have one , flip top , so you will not have the slide back problem like the factory armrest and holds more then the factory one.
http://www.ecstuning.com/Search/SiteSearch/52160429935/


Its a pretty nice option if you dont have one , flip top , so you will not have the slide back problem like the factory armrest and holds more then the factory one.
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
FlipTop Center Armrest Console - Black 52160429935
http://www.ecstuning.com/Search/SiteSearch/52160429935/


Its a pretty nice option if you dont have one , flip top , so you will not have the slide back problem like the factory armrest and holds more then the factory one.
http://www.ecstuning.com/Search/SiteSearch/52160429935/


Its a pretty nice option if you dont have one , flip top , so you will not have the slide back problem like the factory armrest and holds more then the factory one.
Don't have a exact measurement, but there is about a 1/3 more space.
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Picked my baby up at the airport after being away for too damn long. Man I love the feeling of the MINI was driving the rental car for too damn long! Now to order tires and suspension parts and break the bank again $$$$$
Yea, I am with you on that rental car to MINI, big change.
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
I know that feels, bro. I stay on the road a lot and alway miss driving when I'm out. It takes a bit to get reacquainted with all of her idiosyncrasies.
Well yesterday.... gave it good wash and hand wax. and replaced wiper blades.
Stupid me- I applied the wax to the bonnet stripes and now they're a bit hazy. Any thoughts on how to safely get the wax of the stickers?
Feel free to PM.
Thanks.
Stupid me- I applied the wax to the bonnet stripes and now they're a bit hazy. Any thoughts on how to safely get the wax of the stickers?
Feel free to PM.
Thanks.
Some light rubbing compound or a scratch fix rubbing compound with take most of it off. Don't use the aggressive scratch remover. Test if first, most wax marks come off with a microfiber towel, very clean.
Very nice JCW wheels. 32300403545
http://www.ecstuning.com/Search/SiteSearch/32300403545/

Feels very good.
Very nice JCW wheels. 32300403545
http://www.ecstuning.com/Search/SiteSearch/32300403545/

Feels very good.
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Before I even had coffee this morning I pulled the trigger on a few new bits...
K&N typhoon intake
Over filter
GFB DV+
Fresh spark plugs
Roll of DynaLiner for inside wheel wells
Roll of adhesive heat barrier for underside of K&N filter box and mt REV heat shield
I'm going to be pretty busy next few days off :-)
K&N typhoon intake
Over filter
GFB DV+
Fresh spark plugs
Roll of DynaLiner for inside wheel wells
Roll of adhesive heat barrier for underside of K&N filter box and mt REV heat shield
I'm going to be pretty busy next few days off :-)
Some light rubbing compound or a scratch fix rubbing compound with take most of it off. Don't use the aggressive scratch remover. Test if first, most wax marks come off with a microfiber towel, very clean.
Very nice JCW wheels. 32300403545
http://www.ecstuning.com/Search/SiteSearch/32300403545/

Feels very good.
Very nice JCW wheels. 32300403545
http://www.ecstuning.com/Search/SiteSearch/32300403545/

Feels very good.













