1st Generation MINIs / R50/R53 :: Hatch Talk (2002-2006)    Today 10:28 AM

JH-Evergreen
Quick update - probably longer than it should be. Euro Werkz completed the axle replacements the same day. All good there. I kept getting a couple of codes, so Alex and I didn't drive the Mini...
Awesome narrative! Glad to see you're back on the MINI job....

0 Reply

2nd Generation MINIs / R56 :: Hatch Talk (2007+)    Today 10:27 AM

P0597 = 2EE5 = An open in the electrical MAP thermostat circuit. The thermostat proper is a mechanical rather than an electrical function. ...

0 Reply
Raymo2u's Avatar
Raymo2u
Thread Starter

MINIs in General / Mini/MINI BUILDS    Today 09:58 AM

ARD'sDIY
Lovely build Raymo2u . What's your experience with the Mamba turbo, if I can ask?
The Mamba is a really decent turbo, it spools around 3K RPM and never runs out of breath from there. The torque and top end are pretty insane after Lou's tuning, and even crazier now that I have a...

0 Reply

1st Generation MINIs / Navigation & Audio    Today 09:52 AM

Hey Connor g What about the wiring is holding you back? Id be glad to help answer questions

0 Reply
Raymo2u's Avatar
Raymo2u
Thread Starter

MINI Countryman (2010 +) / 1st Gen Countryman (R60) Talk (2010-2015)    Today 09:51 AM

harleydood
Get the dimensions and use Send Cut Send to make the mount(s) out of metal. D
Thank you!

0 Reply

1st Generation MINIs / Stock Problems/Issues    Today 09:04 AM

Sounds like your fan is operating as designed. The low-speed fan should come on when you turn on the A/C or when your temp hits 214F. The hi-speed fan comes on at 234F. Have you checked to ensure...

0 Reply

1st Generation MINIs / R50/R53 :: Hatch Talk (2002-2006)    Today 08:57 AM

Jefferson Riff
Looks like yours is still pretty good shape. It seems you are missing the gear shift knob and floor mats and some stickers. I think you can still find these for sale by other forum members As for...
I do have the floor mats etc. I had them out as I removed most of the interior to deep clean everything. I have all of the original dash trim as well, pulled that to repair a few cracks and polish...

0 Reply

2nd Generation MINIs / R56 :: Hatch Talk (2007+)    Today 08:43 AM

Check here: https://bmwfault.codes/Lookup The service notes for that code are: 1. Check sensor installation (gap to reluctor ring is too large/small, specified gap is 0.1 to 2.0 mm) Inspect to...

0 Reply
Tombstone's Avatar
Tombstone
Thread Starter

1st Generation MINIs / R50/R53 :: Hatch Talk (2002-2006)    Today 08:35 AM

Takayuki_R53
Hello. That's a really hard bolt to access. Remove the upper bolt that secures the starter and cut the cable ties that are holding the wiring to the starter. That should make the bundle of wires a...
Great advice about cutting the cable ties . Thanks

0 Reply
MiamiTVR's Avatar
MiamiTVR
Thread Starter

MINIs in General / the *NEW* Mini Marketplace    Today 08:23 AM

By the time I figured out what it was I had located 5 of the 100 2020 Launch Editions sold in the US. 5% of the total production available at one time and not moving quickly off the lots. ...

0 Reply

All times are GMT -7. The time now is 10:44 AM.