Anyone selling the digital speedo and coding this in the NYC/NJ area? Gladly would pay for someone to do for me.

 

I'm in Wall, NJ ... you want to come here with the kombi and your car i'll install and code it for you. I bought my KOMBI at minipartsdirect.com ... took a while to arrive as the inventory in USA is low and it had to be special ordered from Germany .... ~ $500 USD cost ... cheapest I could find online a few months ago when i did the upgrade

 

As sambir recommended, please check your connections to ensure that all are seated properly. I do not know why you would need to replace your MOST cable if it worked fine before with previous KOMBI and given you didn't damage it.

 

Thanks for the offer! will def hit you up when i get it!

 

Hey man, any chance you could help me too? My dash is in the mail, supposed to get it this weekend. I'm in Riverdale/Bronx, a bit over an hour away but I'll gladly come to you and pay you to install/code it for me. Could you please PM me your cell and how much would you charge me for it. Thanks in advance.

 

HIi all, new member here!

I followed this guide and got to the point where i need to click "detect cafd swe" but i get an error which says - failed to get CAFs for SWE "swfl_0000668e-002_000_014" (Clll)

i was unable ot download the PSdZ version in this thread as its removed. Any help to point me in the right direction?

 

Use this updated PSdZDATA Link instead for newer v.4.26.22 Lite

https://mega.nz/#F!qwQ3CKpI!Iw5b6-JMRb80ifnBPX5OMA

 

Definitely don't forget these last 2 lines of code.

24. Perform FDL coding as necessary on your HU to ensure that the following are set as below:
KOMBI_CIC: set to kombi high
EXTERNER_MOST: set to aktiv

I did and I had lost my steering wheels forward and back controls for advancing a song. It was the KOMBI_CIC set to high that brought back the functions. I also did it from BimmerCode expert, which was nice cause I was to lazy to hook up my laptop and run E-Sys.

 

Thanks so much for agreeing to meet up with me yesterday and help me out with this - I really appreciate it man! It's always a pleasure watching someone that knows what they are doing work their magic. I like my new digital dash - thanks again.

 

My 2019 CountryMan F60 has EntryNBT EVO with NO MOST interface, I do not have Navigation or Car Play or HeadUp Display. Can i still be able to retrofit the 6WB Digital cluster?. My Current Instrument Cluster has just one cable at the back. Is the 6WB Possible on my car?. Thanks.

 

While one can add the MOST cable, if one doesn't already have it, one still needs the MOST interface into which, one end of the cable gets plugged in..

 

My 2019 MINI Cooper CountryMan F60 does not have any MOST or Navigation or HUD or Carplay. The place where the MOST pins are supposed to be on the HeadUnit are actually vacant/balanked off. Can i still be able to install the 6WB cluster?.Is it possible.Thanks.

 

you need a most connection if you want this KOMBI. Upgrade your Headunit to NBT or NBT EVO or ENTRYNAV2

 

I have a HeadUnit that is ENAVEVO type. Is that good enough to retrofit the 6WB digital cluster?. I have no navigation, no carplay, no HUD, no Navigation. Can u advice?.

 

no, as previously stated

Edit: here's a photo of the back of that unit ... see the missing MOST connector

 

Is only a most connection necessary ? On images the 6WB Cluster has an apix connector also, or is this used for cars with HUD?
If budget allows me i want to upgrade the entrynav to a NBT Evo and later the 6wb cluster with most cable.

 

apix is only necessary for the HUD
MOST is required for the 6WB as many data travel from the HU to the 6WB over MOST as opposed to analog can lines

 

Thanks, good news.
First i need to upgrade entrynav to Nbt Evo for me to be able to get 6wb

 

According to photos, I see ENTRYNAV has a most connection. You would need to check the coding on this unit to see if it has these lines available, if so, you should be able to add the 6WB without updating the headunit
KOMBI_CIC: set to kombi high
EXTERNER_MOST: set to aktiv

 

This is a good suggestion, but i also want to do the NBT Evo retrofit and have carplay available, but this is good info.
Will check this weekend by removing screen and seeing if my entrynav has Most.

 

contact Steve @sb2002 ... he'll hook you up with the EVO Retrofit, however not sure about shipping cost and times to the Netherlands under the current conditions

 

Hello all.

I have retrofitted successfully the digital gauge to my 2020 Mini JCW Countryman by following the thread's guide (thank you).
I have the JCW logo, micro-map and street junction, music playlist displaying.

I was wondering if anything has taken this to the next level by coding additional parameters for the digital gauge.

As an example; brightness, resolution, items to display etc.

Has anyone configured their main headunit to show the digital display in the settings?
Mine shows the old gauge in the settings.

Thank you,
John

 

I'm not too far away, just north of Philly.

Which part # did you order for the cluster? I'm looking for the non-GP3 cluster (i.e., I'm looking for the cluster found in the Cooper/Cooper S). Also, my car (2019 F57 with the 8.8" nav package) doesn't have the HUD, so I know I need to get a MOST cable. Did you also have to, and if so, which part did you get? Thanks!

 

If you need to install the MOST cable the installation is a bit more involving but nothing too crazy:


Just make sure your head unit has the connector for the MOST cable itself (not sure how to determine if it does without taking the center display off to check visually).

 

Anyone guys?