Thanks but unfortunately that did not work. I did some more research and also experimented with these but no luck. I start to think for those without HUD, it cannot be done via coding. Proof me wrong.

NAVI_HUD_AVAILABLE = aktiv
KOMBI_AUFLOESUNG = aktiv
HUD_KOMPRIMIERUNG_ART = rle_1
HUD_AUFLOESUNG = aufloesung_1

Then in KOMBI:
BC_RW_NAVIKOPPLUNG_ENABLE = aktiv (This did enable 2 additional nav related display when you cycle the Kombi menu)
HUD_NAVI_ENABLE = aktiv
HUD_PIA_NAVI = aktiv

 

In addition to no turn-by-turn nav on the cluster, I wanted to report back Auto Start Stop selection no longer works. Granted I never use the feature but if you do, take this into consideration.

From chatting to the famous shawnsheridan, he pointed out that HU_NBT need to be VO coded in addition to KOMBI after adding 6WB to FA - this was not mentioned earlier here so something you guys can help validate. Thanks!

 

I have turn-by-turn nav info in the digital cluster without issue. Maybe because I have a later car?? But I can’t reset my trip Openometer and can’t save button favorites 🤷🏻‍♂️

 

Do you have HUD?

Update on Auto Start Stop - After I reverted the coding changes made in attempt to enable turn-by-turn nav, the switch works again. With our cars I think Auto Start Stop status is indicated by the light on the physical switch and not from the cluster.

 

No, my car doesn’t have the HUD.

 

What year is your car? Perhaps you have a newer head unit. Mine is ID4 from 2017.

Is there a toggle to turn on and off nav info on the cluster? I think not other than pressing the button on the turn signal lever to cycle the information?

 

My car is a 2019 (March 2018 production) with the full Connected XL or whatever it's called (the big touchscreen with nav and CarPlay.

 

I am drawing the conclusion that on my 2017 with ID4 head unit, the nav info cannot be sent to the 6WB cluster and it is something one cannot "enable" via coding.

I have tried VO code HU_NBT_EVO with 6WB written to the FA, as well as tried these settings.
NBT EVO:
FPK_COMING_ROAD_BMP Werte=00
KOMBIGUIDING_SCHALTBAR Werte=00
HIST_GAS_CONSUMP Werte=01
BASIS_KOMBI_MMI_LIST Werte=00
HUD_KOMPRIMIERUNG_ART Werte=01 (rle_2)
HUD_AUFLOESUNG Werte=01 (aufloesung_2)
KOMBI_AUFLOESUNG Werte=00
LOUPE_TACHO_KOMBI Werte=01
DRIVE_MODE_KOMBI Werte=01
CALMING_KOMBI Werte=00
MFID_KOMBI_VARIANT Werte=01
KOMBI_CIC Werte=00
SETTINGS_INFO_DISPLAY Werte=01

The NAVI_NBT_ENABLE key does not show on KOMBI, at least from BimmerCode. So it may be the reason.

The retrofit experience has been a fun one and I am very pleased with the results. Yes not perfect but well worth the upgrade.

 

Does anyone know what’s the coding option to disable speed correction and if it’s possible to increase speed refresh rate?

 

Hi guys,

Anyone could help me?
Is possible to know if my car has MOST port without removing the headunit?


Thanks.

 

One way to tell is if you have the heads up display, otherwise I believe it wont have it

 

Thanks friend, I don't have the heads up display.
My head unit is the EntryNav2_M1941D1R. (I don't have lan port, carplay or sat nav.)

 

if it is the entrynav 2 it does have the most fiber optic port

 

That is not true. I have MOST port with my ID4 head unit with Nav, but without HUD.

 

The only head units without MOST connectors are the basic four line displays that were in the 2014-2016 cars without the Media Package (which is what I have in my car). Any car with a larger screen display in the center will have a connector in the head unit. Cars without Nav will not have a MOST cable, though and that will need to be added.

 

that is not true…. Some just do have most… you can sometimes check by calculating a tal by vin. And compare it agains a data file someone shared. This works for the entrynav2. Cars with entrynav1, some with navi some without some just do have most!

 

Hi friend, this is my headunit (EntryNav2_M1941D1R):
With VIN you can help me, if I have MOST port?

Thanks friend.

 

send me your vin so i can check.

 

Sent to your PM friend.

 

I have a 2018 F60 Countryman S ALL4 and am having issues locating the digital cluster 62105A189C9. Can anyone confirm whether the newer/replacement models are compatible?

 

you need the latest. Send me a msg i can supply them

 

All - a quick note for a big THANK YOU @sambir!

Sambir worked with me to source, ship and code a Hybrid-specific virtual speedo, plus, helped with coding other updates to the HU reving up to 2022 firmware and adding CarPlay. My firmware was relatively old, so he had to work several fixes to resolve all the errors. He's an expert in coding... I sat by and watched him remote into my 2018 Countryman SE and he expertly went through the coding in rapid succession. A master at work!

I'd do it again, which is the highest compliment I think I could say. Thank you, @sambir. I couldn't be happier!

 

Hey guys-
really want to add this digital cluster to my mini. I have an f60 2018 Mini Countryman. Someone please tell me this will work and please help me figure out how. I am completely new at this. Appreciate any and all help. Is it even possible?

Here is a photo of my dash

much love.
-Jeremy

 

I advice that you read through the topic and you will find the answers.
The requirements for the 6WB digital cluster is that your HeadUnit must be having feature> "Navigation & NBT EVO ID6 with MOST port on it with (or) without HeadUp display". If your car has this feature its possible to upgrade & code the new 6WB cluster that you have to buy. If your car does not have the suitable head unit, you will have to retrofit a new head unit with that feature=more money to spend.

 

your car probably has an entrynav2 unit. Since you have no hud your unit might not have a MOST port to fit the virtual cluster on. That mean you then need to replace the unit with one with MOST. If you want me to help you can send me a pm. I can get you the clusters/units