When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Following this thread, interested to see if this is compatible with the Hybrid Electric version of the Countryman F60SE. Primary difference I see is that the F60SE is an automatic with e-boost and regen braking. The left side of the cluster shows an indicator of power output related to manifold pressure/vacuum, with the dial going below 0 to indicate regen braking and at the top it indicates both traction and IC motors engaged for peak power output. There is also a led bar gauge indicating traction battery level around the curve of the power indicator.
Has anyone tried this part: 62105A33B70 for the cluster being discussed here with a hybrid? Is there a different part for hybrid use? Reviewing the part list at RealOEM, this digital cluster doesn't show up for the F60SE. TIA
Following this thread, interested to see if this is compatible with the Hybrid Electric version of the Countryman F60SE. Primary difference I see is that the F60SE is an automatic with e-boost and regen braking. The left side of the cluster shows an indicator of power output related to manifold pressure/vacuum, with the dial going below 0 to indicate regen braking and at the top it indicates both traction and IC motors engaged for peak power output. There is also a led bar gauge indicating traction battery level around the curve of the power indicator.
Has anyone tried this part: 62105A33B70 for the cluster being discussed here with a hybrid? Is there a different part for hybrid use? Reviewing the part list at RealOEM, this digital cluster doesn't show up for the F60SE. TIA
i have hybrid in stock. Send me a pm i might be able to send you one
Hello - Congrats on the complete install! Could you (or anyone) please provide me with an actual link to get the correct combo of ESYS & PSdZData please?? We could email,PM,teams,skype,lol anything...
Currently have E-SYS 3.33.4 & ZData 4.27.20 (closest to 4.24 I could find anywhere)
I keep seeing this model number showing up on a lot of sales websites as discontinued - 62105A189D6. Has anyone seen if there's a specific replacement part for that for the JCW F56?
I keep seeing this model number showing up on a lot of sales websites as discontinued - 62105A189D6. Has anyone seen if there's a specific replacement part for that for the JCW F56?
I am also seeking for similar information, where 62105A189D6 is not compatible for my 2017 F57 USA when a few eBay vendors checked the VIN. If you have access to BMW/MINI part numbers please help us compile a list. Thanks much.
I retrofitted the digital cluster to my F57 a while ago, almost a year it must be. My F57 is a weekend car and we’ve been living in a temporary place for almost a year now, and the MINI has largely been in storage that whole time. I recently drove it and I was reminded that there are two odd things about the cluster/infotainment since the retrofit. Namely, I cannot save any favorites to the buttons. I save them and then the next time I turn the car on the favorites are gone. Two, I cannot reset the Openometer (tracks how long the top is down on the convertible). Anyone ever see these two issues? Any fixes??
What year is your F57 and which part number is your cluster? I am wondering there is a specific part number other than the "common" 62105A189D6 we need. See my post above.
What year is your F57 and which part number is your cluster? I am wondering there is a specific part number other than the "common" 62105A189D6 we need. See my post above.
2019 F57 and I used part # 62-10-5-A18-9D5 because that’s what my local dealer advised me at the time which was December 2020.
I checked the MOST cable and did see a light coming out nearest to the clip toward the cluster, although it only showed for a few seconds after turning the car off. I assume this is normal.
I have also tried to set Kombi_cic = kombi_high, and Externer_most = aktiv before I edit the FA and Read ECU, but KOMBI is still missing.
What did I do wrong?
Last edited by TechTurbo; Apr 5, 2022 at 10:28 PM.
I checked the MOST cable and did see a light coming out nearest to the clip toward the cluster, although it only showed for a few seconds after turning the car off. I assume this is normal.
I have also tried to set Kombi_cic = kombi_high, and Externer_most = aktiv before I edit the FA and Read ECU, but KOMBI is still missing.
I am finally getting around to changing the display in my 2019 JCW F56. Would anyone be able to confirm if this would fit in my mini? My car has the HUD.
I am finally getting around to changing the display in my 2019 JCW F56. Would anyone be able to confirm if this would fit in my mini? My car has the HUD.
I checked the MOST cable and did see a light coming out nearest to the clip toward the cluster, although it only showed for a few seconds after turning the car off. I assume this is normal.
I have also tried to set Kombi_cic = kombi_high, and Externer_most = aktiv before I edit the FA and Read ECU, but KOMBI is still missing.
What did I do wrong?
I have solved the problem of KOMBI not showing up after Read ECU. I am super happy with the results!
The root cause is BKOMBI was stored in the VCM and blocking E-Sys to read KOMBI. You need to first read SVT to manually remove BKOMBI, then write it back to the VCM (write SVT target). Once done follow the coding instructions posted in this thread and everything should work as expected! Another tip is to grab the latest E-sys and PSdZData version available. If this is all too much to DIY, consider getting help from members like sambir.
I have solved the problem of KOMBI not showing up after Read ECU. I am super happy with the results!
The root cause is BKOMBI was stored in the VCM and blocking E-Sys to read KOMBI. You need to first read SVT to manually remove BKOMBI, then write it back to the VCM (write SVT target). Once done follow the coding instructions posted in this thread and everything should work as expected! Another tip is to grab the latest E-sys and PSdZData version available. If this is all too much to DIY, consider getting help from members like sambir.
F57 Digital Cluster Retrofit
Any issues with your openometer not resetting, or your button favorites reseting after every key cycle?
BTW for those with non-touch screen navigation and without HUD, do directions show on the digital cluster? I have not tested everything yet so would like to know in advance what to expect.
Any issues with your openometer not resetting, or your button favorites reseting after every key cycle?
They work as expected - able to reset the trip openometer and button favorites are kept. The all time openometer was reset so be aware.
No turn by turn nav on the cluster, and I think by design giving the head unit and I-Drive versions are older (2017). Can someone here confirm this expectation.
And those who have done further coding on the KOMBI, please kindly share what is possible. I only know about adding the JCW logo and I am sure there are more.
They work as expected - able to reset the trip openometer and button favorites are kept. The all time openometer was reset so be aware.
No turn by turn nav on the cluster, and I think by design giving the head unit and I-Drive versions are older (2017). Can someone here confirm this expectation.
And those who have done further coding on the KOMBI, please kindly share what is possible. I only know about adding the JCW logo and I am sure there are more.
For those who have enabled the JCW Logo please share how you did it... To FDL code, I tried E-Sys 3.27.1 with the free Launcher Pro 2.8.2 but the setup is too old with outdated CAFD Mapping. Therefore, attributes including MPM_ENABLE and BMW_LOGO are not found and editable.
Would this work for a non-HUD 2017 JCW with no Nav?
Quote:
Originally Posted by MomMiniView Post
I am finally getting around to changing the display in my 2019 JCW F56. Would anyone be able to confirm if this would fit in my mini? My car has the HUD.
I am finally getting around to changing the display in my 2019 JCW F56. Would anyone be able to confirm if this would fit in my mini? My car has the HUD.
For those who have enabled the JCW Logo please share how you did it... To FDL code, I tried E-Sys 3.27.1 with the free Launcher Pro 2.8.2 but the setup is too old with outdated CAFD Mapping. Therefore, attributes including MPM_ENABLE and BMW_LOGO are not found and editable.
BimmerCode does not recognize KOMBI either...
Update - The latest BimmerCode update recognize the 6WB cluster and you can change the logo to GP or JCW along with Sport Mode background! I still could not get nav directions to show on the cluster; searching online suggests changing NAVI_NBT_ENABLE but this key could not be found under KOMBI.
Anyone out there turn nav directions on successfully? Please help out the community here.
