Drivetrain Manic stage 2 JCW intercooler option
Thread Starter
|
2nd Gear
Joined: Nov 2017
Posts: 84
Likes: 9
Manic stage 2 JCW intercooler option
Hello all. I want to start building towards a stage 2 tune and was looking at the stock JCW R60 intercooler. Anyone running the upgraded JCW intercooler on a R60/61S? Comments/issues? Thanks in advance
Banned
Joined: Sep 2017
Posts: 442
Likes: 38
From: NCAL
as far as i know there is now difference between the IC's.. they are the same #
**Ebay can help you out though, as near 90% of anything available will be made in China.. so may as well order it from the source for 1/3 price.
**Ebay can help you out though, as near 90% of anything available will be made in China.. so may as well order it from the source for 1/3 price.
Thread Starter
|
2nd Gear
Joined: Nov 2017
Posts: 84
Likes: 9
I was talking about this one which is bigger than the stock 17512751277
https://www.ecstuning.com/b-genuine-...r/17517632764/
You can find it for ~$400. It’s pricier than the Chinese copies but if it’s performing well and fits better then it might be worth it. Also since it’s a mini part if I end up selling the car down the road it’s one less part to replace to bring back to stock.
https://www.ecstuning.com/b-genuine-...r/17517632764/
You can find it for ~$400. It’s pricier than the Chinese copies but if it’s performing well and fits better then it might be worth it. Also since it’s a mini part if I end up selling the car down the road it’s one less part to replace to bring back to stock.
+1
Some more info here but no one posted up any dyno results:
https://www.northamericanmotoring.co...-question.html
Some more info here but no one posted up any dyno results:
https://www.northamericanmotoring.co...-question.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
We've used them but it does take a little work to get it to fit as we cut some of the plastic to get it to work.
https://www.waymotorworks.com/r60-co...tercooler.html
So we just normally use the Forge as it bolts right in place
https://www.waymotorworks.com/forge-...r-s-turbo.html
We also have used the Wagner too
https://www.waymotorworks.com/wagner...7-r58-r59.html
https://www.waymotorworks.com/r60-co...tercooler.html
So we just normally use the Forge as it bolts right in place
https://www.waymotorworks.com/forge-...r-s-turbo.html
We also have used the Wagner too
https://www.waymotorworks.com/wagner...7-r58-r59.html
Most the JCW R60s we have done stage 2 tunes on just stuck with the stock JCW intercooler to save money. So hard to say as we would need some data logging to see what the difference between the two is on the same car. If would be an interesting side by side comparison.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zimm
R60/61 Cooper S Drivetrain
3
May 15, 2017 11:21 AM
furnitureman9
R55 :: Clubman Talk (2008+)
9
Mar 8, 2017 10:53 AM
johnso56
Drivetrain (Cooper S)
13
Jul 12, 2015 12:54 PM
guitfiddler
R50/R53 :: Hatch Talk (2002-2006)
10
Oct 10, 2007 12:04 PM
