General MINI Talk Shared experiences, motoring minutes, and other general MINI-related discussion that applies to all MINIs, regardless of model, year or trim.
Sponsored by:
Sponsored by:

What did you do to your mini today?

Thread Tools
 
Search this Thread
 
Old Mar 12, 2010 | 08:41 PM
  #51  
AZMINI10's Avatar
AZMINI10
2nd Gear
Joined: Jan 2010
Posts: 59
Likes: 0
From: Gilbert, AZ
I got my MINI's windows tinted today. Yeah wont be a million degrees in the car this summer.
 
Reply
Old Mar 13, 2010 | 01:45 AM
  #52  
morphix's Avatar
morphix
3rd Gear
iTrader: (1)
Joined: Dec 2008
Posts: 203
Likes: 0
From: Coconut Creek, FL



Not today but last Sat (3-6-10), was in Rome with no wifi, just got to Paris and was finally able to upload a pic.
 
Reply
Old Mar 15, 2010 | 12:21 PM
  #53  
pepperwhite09's Avatar
pepperwhite09
1st Gear
Joined: Aug 2009
Posts: 46
Likes: 0
i got my stripe put on, it is on bonnet and boot, straight down the rivers side, looks good, but i think they sent me the wrong color
 
Reply
Old Mar 15, 2010 | 12:40 PM
  #54  
NightFlyR's Avatar
NightFlyR
6th Gear
iTrader: (3)
Joined: May 2008
Posts: 1,520
Likes: 0
From: NJ
Originally Posted by morphix



Not today but last Sat (3-6-10), was in Rome with no wifi, just got to Paris and was finally able to upload a pic.
Are those Ecel wheels on there, ? they look sharp, mine just came and i am waiting to put them on.
Took the Mini in a Month early for Inspection as i am going away for 3 weeks and did nto want to deal with it when I came back, but it failed, needs a tie rod end ordered and will be installed tomorrow
 
Reply
Old Mar 15, 2010 | 01:38 PM
  #55  
tcscb1963's Avatar
tcscb1963
3rd Gear
Joined: Nov 2009
Posts: 190
Likes: 0
Installed some new billet pedals, a mini fini cup holder, and painted the heat shield in the rear so you can't see the sliver through my new M7 rear grilles.
 
Reply
Old Mar 16, 2010 | 01:30 AM
  #56  
morphix's Avatar
morphix
3rd Gear
iTrader: (1)
Joined: Dec 2008
Posts: 203
Likes: 0
From: Coconut Creek, FL
Originally Posted by NightFlyR
Are those Ecel wheels on there, ? they look sharp, mine just came and i am waiting to put them on.

Yep, E-22s, I like them a lot.
 
Reply
Old Mar 16, 2010 | 01:33 AM
  #57  
NightFlyR's Avatar
NightFlyR
6th Gear
iTrader: (3)
Joined: May 2008
Posts: 1,520
Likes: 0
From: NJ
Originally Posted by morphix
Yep, E-22s, I like them a lot.

Real Nice, mine will be on by the end of the week, have to get my Tie rod fixed today.
Are those 16 or 17s, what size rubber?
 
Reply
Old Mar 20, 2010 | 09:01 PM
  #58  
Tmini08's Avatar
Tmini08
5th Gear
Joined: Apr 2009
Posts: 619
Likes: 0
From: The Nexus: I-95, I-20, I-40, I-85....etc.
Installed invisishield film foglight kit.
 
Reply
Old Mar 20, 2010 | 09:53 PM
  #59  
joe_bfstplk's Avatar
joe_bfstplk
5th Gear
15 Year Member
Liked
Loved
Community Favorite
Joined: Nov 2009
Posts: 1,060
Likes: 96
From: Mount Doom, Mordor
Ok, so it wasn't today, it was two days ago, but I got the one-ball done. I immediately took off on a road trip to Tucson, going the very indirect route via Globe from Mesa. It runs much smoother now--with louder, but still mellow exhaust note, more of that throttle-off burble. The best thing is that it feels like it finally coughed up a hairball it's been hacking on.... It also seems to be getting noticeably better gas mileage, so the $30 I spent on it should come back relatively quickly....

Yesterday--I painted my intercooler cover.

Today--I modded the stock airbox and the cowl panel behind it to vastly increase the amount of cowl induction going on. I can't wait to take the trip back home to see how it responds. Preliminary test drive impression: seems to breathe easier, slight increase in supercharger whirr. I can't wait to take the trip back home to see how it responds. https://www.northamericanmotoring.co...ml#post3010548

C ya,
Dutch
 
Reply
Old Mar 20, 2010 | 10:37 PM
  #60  
Cactusflier's Avatar
Cactusflier
2nd Gear
Joined: Jul 2006
Posts: 102
Likes: 0
From: Gilbert, AZ
Drove it today. But two days ago I installed a set of KW V1 coilovers.
 
Reply
Old Mar 21, 2010 | 03:26 PM
  #61  
kemo's Avatar
kemo
3rd Gear
Joined: Sep 2009
Posts: 266
Likes: 4
From: New Brunswick, Canada
Well it was actually yesterday, but I finally picked out my rims & tires and ordered them (Enkei SC03 Silver rims and Falken Ziex ZE-912 - 215/45R17 tires)

 

Last edited by kemo; Mar 22, 2010 at 02:56 PM.
Reply
Old Mar 21, 2010 | 08:29 PM
  #62  
mrjasey's Avatar
mrjasey
3rd Gear
Joined: Jun 2008
Posts: 253
Likes: 0
From: Northern VA
washed and wax car and new wheels. then drove under an overpass that construction was being done on and got water +concrete dust splats all over the car! ...AWESOME!!
 
Reply
Old Mar 21, 2010 | 09:36 PM
  #63  
MrsDarcy's Avatar
MrsDarcy
Coordinator :: Alaska MINI Club
iTrader: (2)
Joined: Aug 2009
Posts: 137
Likes: 0
From: Eagle River, Alaska
Managed to reset my oil change indicator light.... Also, this weekend I moved the bluetooth microphone from the passenger side to the drivers side. It was the easiest mod ever, and makes a big difference in the sound of my voice on the receiving end. Everyone is now happy they can hear me and I don't have to scream!
 
Reply
Old Mar 22, 2010 | 01:15 PM
  #64  
morphix's Avatar
morphix
3rd Gear
iTrader: (1)
Joined: Dec 2008
Posts: 203
Likes: 0
From: Coconut Creek, FL





I like it, was a little tricky to get on but I think it came out well. Also dropped off my bro's Clubman to be painted, busy day.
 
Reply
Old Mar 22, 2010 | 07:30 PM
  #65  
MiniTS-05's Avatar
MiniTS-05
3rd Gear
iTrader: (1)
Joined: Aug 2005
Posts: 167
Likes: 0
From: Columbia, MD
I installed the Aero kit and halo turning signals, this coming weekend koni shocks and springs "
 
Reply
Old Mar 22, 2010 | 07:38 PM
  #66  
Albiecrazy's Avatar
Albiecrazy
6th Gear
Joined: Mar 2009
Posts: 1,980
Likes: 2
From: Eastern Long Island, NY
Got my summer wheels out of the basement and cleaned 'em up! Don't worry - they went down there spotless. Just had to dust them.

They go on Wed. I hit a pothole or two this winter with the run flats so I'm getting a 4 wheel alignment while I'm at it - if it even needs it...
 
Reply
Old Mar 22, 2010 | 07:39 PM
  #67  
Albiecrazy's Avatar
Albiecrazy
6th Gear
Joined: Mar 2009
Posts: 1,980
Likes: 2
From: Eastern Long Island, NY
Originally Posted by kemo
Well it was actually yesterday, but I finally picked out my rims & tires and ordered them (Enkei SC03 Silver rims and Falken Ziex ZE-912 - 215/45R17 tires)

Those are great looking wheels! And they look easy to clean, too! I've got to see pics when they're on!
 
Reply
Old Mar 22, 2010 | 08:17 PM
  #68  
rkiller691's Avatar
rkiller691
1st Gear
Joined: Dec 2009
Posts: 17
Likes: 0
From: Los Angeles CA
So basiclly i have an R56 non-S, not much i can do. i jus began with the basics... lighting. So I've done a 6000K HID Kit, LED foglights (with output ), Tinted the windows, smoked out my taillights, and got rally lights with LED Halo rings built in. and LED lisense plate lights. my 1st and last mod to the engine is an NON-S air intake from K&N

take a look lemme know what u think

this first pic is near the LA River on a partly cloudy day
http://s719.photobucket.com/albums/w...t=IMG_9373.jpg

this next pic is my smoked taillights
http://s719.photobucket.com/albums/w...t=IMG_9390.jpg

my mini from the side
http://s719.photobucket.com/albums/w...t=IMG_9427.jpg

this pic is the License plate lights plus the rally and the lights on
(b4 the HID's)
http://s719.photobucket.com/albums/w...t=IMG_9427.jpg

this next one is a pic of my LED foglights (194 bulbs)
http://s719.photobucket.com/albums/w...t=photoert.jpg

this last pic is of my HID headlights.
http://s719.photobucket.com/albums/w...nt=photo-1.jpg
 
Reply
Old Mar 22, 2010 | 08:32 PM
  #69  
jbrowland's Avatar
jbrowland
3rd Gear
Joined: Dec 2009
Posts: 261
Likes: 0
From: Los Angeles
Got my windows tinted today! Nice!
 
Reply
Old Mar 22, 2010 | 09:18 PM
  #70  
itsminibtch's Avatar
itsminibtch
Thread Starter
|
4th Gear
iTrader: (1)
Joined: Dec 2008
Posts: 598
Likes: 5
From: San diego, CA
Originally Posted by rkiller691
So basiclly i have an R56 non-S, not much i can do. i jus began with the basics... lighting. So I've done a 6000K HID Kit, LED foglights (with output ), Tinted the windows, smoked out my taillights, and got rally lights with LED Halo rings built in. and LED lisense plate lights. my 1st and last mod to the engine is an NON-S air intake from K&N

take a look lemme know what u think

this first pic is near the LA River on a partly cloudy day
http://s719.photobucket.com/albums/w...t=IMG_9373.jpg

this next pic is my smoked taillights
http://s719.photobucket.com/albums/w...t=IMG_9390.jpg

my mini from the side
http://s719.photobucket.com/albums/w...t=IMG_9427.jpg

this pic is the License plate lights plus the rally and the lights on
(b4 the HID's)
http://s719.photobucket.com/albums/w...t=IMG_9427.jpg

this next one is a pic of my LED foglights (194 bulbs)
http://s719.photobucket.com/albums/w...t=photoert.jpg

this last pic is of my HID headlights.
http://s719.photobucket.com/albums/w...nt=photo-1.jpg
nice pics! car looks brand new.
 
Reply
Old Mar 22, 2010 | 10:15 PM
  #71  
Oxybluecoop's Avatar
Oxybluecoop
6th Gear
15 Year Member
iTrader: (-1)
Joined: Oct 2007
Posts: 2,977
Likes: 5
From: Delaware
Originally Posted by rkiller691
So basiclly i have an R56 non-S, not much i can do. i jus began with the basics... lighting. So I've done a 6000K HID Kit, LED foglights (with output ), Tinted the windows, smoked out my taillights, and got rally lights with LED Halo rings built in. and LED lisense plate lights. my 1st and last mod to the engine is an NON-S air intake from K&N

take a look lemme know what u think

this first pic is near the LA River on a partly cloudy day
http://s719.photobucket.com/albums/w...t=IMG_9373.jpg

this next pic is my smoked taillights
http://s719.photobucket.com/albums/w...t=IMG_9390.jpg

my mini from the side
http://s719.photobucket.com/albums/w...t=IMG_9427.jpg

this pic is the License plate lights plus the rally and the lights on
(b4 the HID's)
http://s719.photobucket.com/albums/w...t=IMG_9427.jpg

this next one is a pic of my LED foglights (194 bulbs)
http://s719.photobucket.com/albums/w...t=photoert.jpg

this last pic is of my HID headlights.
http://s719.photobucket.com/albums/w...nt=photo-1.jpg
Nice work! But don't think just because you have a NA MINI your options are limited.
 
Reply
Old Mar 23, 2010 | 06:10 AM
  #72  
VioletDC's Avatar
VioletDC
3rd Gear
iTrader: (1)
Joined: Sep 2006
Posts: 300
Likes: 0
From: Fort Washington, MD
Well, it wasn't 2day, but over the wkend: bathed Scoopie and finally got 2 install her MINI Eyes!
 
Attached Thumbnails What did you do to your mini today?-scoopie-s-mini-eyes.jpg  

Last edited by VioletDC; Mar 23, 2010 at 06:27 AM.
Reply
Old Mar 23, 2010 | 08:37 AM
  #73  
tcscb1963's Avatar
tcscb1963
3rd Gear
Joined: Nov 2009
Posts: 190
Likes: 0
Cut out the resonator and put a straight pipe in my JCW Exhaust. Ooooh, sounds mean now
 
Reply
Old Mar 23, 2010 | 09:44 AM
  #74  
kemo's Avatar
kemo
3rd Gear
Joined: Sep 2009
Posts: 266
Likes: 4
From: New Brunswick, Canada
Originally Posted by Albiecrazy
Those are great looking wheels! And they look easy to clean, too! I've got to see pics when they're on!
Thanks Albie, they should be at my door in about 2 weeks.....I'll post pics as soon as they are on.

As for today, I ordered a new grille and got a great deal on a set of aftermarket driving lamps.

Car looks great with the mods rkiller......I'm a big fan of silver.
 

Last edited by kemo; Mar 25, 2010 at 01:41 PM.
Reply
Old Mar 23, 2010 | 09:48 AM
  #75  
chops's Avatar
chops
2nd Gear
iTrader: (1)
Joined: Apr 2009
Posts: 63
Likes: 0
From: Detroit
i painted my tailight rings today......
 
Reply



All times are GMT -7. The time now is 10:25 PM.