I recently upgraded my Turbo and the silicone or rubber grommet on the intake disintegrated. the replacement has an open bung or port. I have never had anything connected there since I owned my car on the oem pipe. I have seen a couple pics that show it connected to a pipe. I previously had a sensor plugged in but nothing on the bung

what is this? I don't want to let unmetered air in and don't want to leave something unconnected

 

There are definitely 2 plugs that goes their........my mind is drawing a blank let think for a minute just came off a little road trip....

 

That little bung the connection has a little push in clip that goes there

 

the replacement has an open pipe next to the wires that's open. going to just find a cap and plug it. massive for euro cars that have a map sensor.

 

What year is your vehicle........

 

2011 Cooper S

 

There were a few cars that did not have that vent hose connected. If yours doesn’t use it, just cap it and you’ll be fine.

 

I was thinking as much. thanks

 

Yep talked about here: https://www.northamericanmotoring.co...nd-a-tube.html

https://www.northamericanmotoring.co...ir-intake.html


11157618255