R56 ra2fanatic's R56S build
Went to the track yesterday at Button Willow. Must say I still love the BF Goodridge G-Force Rivals a lot. This is my 2nd set since I sold my first set to a good friend of mine after I sold the RE-30's. Enjoy the week everybody!
6th Gear
Joined: Apr 2013
Posts: 2,070
Likes: 3
From: Plainfield, IL
6th Gear
Joined: Mar 2013
Posts: 3,428
Likes: 37
From: Mission Viejo, CA
I absolutely love these 18" Custom Red CCW Classics wheels better than any others ra2fanatic has had, why did you get rid of these wheels ra2fanatic?
Your builds are above and beyond of 99% out there online!
Your builds are above and beyond of 99% out there online!
Thanks! Miss this finish too....
StopTech clearance. It pushed the wheels out way too much that when I hit hard dips on freeways or anywhere in general that doesn't have even surface it would destroy my wheel arches and pop it off my front bumper. Just a headache at the end of the day. As much as I loved them, my StopTech's are never going to go, wheels are always going to be interchangeable.
Sadly CCW doesn't do custom anodized red anymore, so I had to go with their brushed silver on my D110's, if it weren't for that, I'd have the same finish as my 2nd set of Classics.
Sadly CCW doesn't do custom anodized red anymore, so I had to go with their brushed silver on my D110's, if it weren't for that, I'd have the same finish as my 2nd set of Classics.
6th Gear
Joined: Mar 2013
Posts: 3,428
Likes: 37
From: Mission Viejo, CA
Thanks! Miss this finish too....
StopTech clearance. It pushed the wheels out way too much that when I hit hard dips on freeways or anywhere in general that doesn't have even surface it would destroy my wheel arches and pop it off my front bumper. Just a headache at the end of the day. As much as I loved them, my StopTech's are never going to go, wheels are always going to be interchangeable.
Sadly CCW doesn't do custom anodized red anymore, so I had to go with their brushed silver on my D110's, if it weren't for that, I'd have the same finish as my 2nd set of Classics.
StopTech clearance. It pushed the wheels out way too much that when I hit hard dips on freeways or anywhere in general that doesn't have even surface it would destroy my wheel arches and pop it off my front bumper. Just a headache at the end of the day. As much as I loved them, my StopTech's are never going to go, wheels are always going to be interchangeable.
Sadly CCW doesn't do custom anodized red anymore, so I had to go with their brushed silver on my D110's, if it weren't for that, I'd have the same finish as my 2nd set of Classics.
6th Gear
Joined: Mar 2013
Posts: 3,428
Likes: 37
From: Mission Viejo, CA
I know what you mean, had a paintball gun anodized (T6 6160 aluminum) many years ago and there were areas that looked somewhat unfinished.
If you don't mind my asking how much did the iPE set you back? I recently came across the Garbino's that I liked, but after hearing some YouTube of the iPEs definitely like those better. That's on my target list for next year *hopefully*.
Apparently! lol.
Contact GT Auto Concepts and see what they give you. I've given out the price I can get it at, but I kinda stopped doing that only because I get pm's all the time about it, then they get ice cold after I give them the price. And that's with people also saying "I'll come out to see your ride and check out your exhaust because I really want to get it but I want to hear it in person" and THEY NEVER DO.
People are strange, it'd be great to get to hang out with another owner for a bit and talk shop. :p I used to do the same with a classic motorcycle group: we'd hang out, work on bikes, compare parts, and have beers. Sounds like a MINI gathering for an afternoon!
MINI meets are strange. I've been to a couple and they definitely lack a vibe I've been used to when I had my BMW. I know a few and they're great, but others....it's a strange feeling.
Anyways! you'll be seeing high 2, low 3's on the system at the end of the day. But nothing beats the sound of this system. I get tire of things pretty quickly on the MINI, especially when it comes to wheels, but I can say there are a few things that'll never go...my shifter, exhaust, and brakes. Everything else...they have a shelf life....:D
Anyways! you'll be seeing high 2, low 3's on the system at the end of the day. But nothing beats the sound of this system. I get tire of things pretty quickly on the MINI, especially when it comes to wheels, but I can say there are a few things that'll never go...my shifter, exhaust, and brakes. Everything else...they have a shelf life....:D
lol. Might as well buy it brand new.
It's $1034 from Hard Motorsport, the only US distributor of the CAE Ultra Shifter. AND for $1034 NEW, you get the updated CAE shifter which was released earlier this year. Same great feel, but I think they revised the design a bit in regards to the reverse gear or something like that.
So best to get a new one because you don't know how worn out it could have been
He's sitting on something that won't ever appreciate, so not sure what he's trippin' on.
It's $1034 from Hard Motorsport, the only US distributor of the CAE Ultra Shifter. AND for $1034 NEW, you get the updated CAE shifter which was released earlier this year. Same great feel, but I think they revised the design a bit in regards to the reverse gear or something like that.
So best to get a new one because you don't know how worn out it could have been
He's sitting on something that won't ever appreciate, so not sure what he's trippin' on.
Really wanna see how your car drive on ohlins...(with a lot more power and seriousness and iPE sound!)
I have a couple of Vimeo videos but don't really post much, so you'll be sadly disappointed with the update interval. lol. BUT when I do post a video, it's normally pretty good, but also bad.
I go through buying GoPros and then selling them pretty quickly, don't know why but if I have it sit around long enough I end up selling it because I feel bad and know someone else will put it to better use.
Not sure. When I called up Ohlin before they didn't think it was necessary to get revalved so quickly. Their intervals are rather short, but I've gone well over 25k miles and haven't had any issues, so it's up to end user to decide when it's time to service them...
Which Hyperco springs did you get and who did you order them from!? I have a couple of Vimeo videos but don't really post much, so you'll be sadly disappointed with the update interval. lol. BUT when I do post a video, it's normally pretty good, but also bad. I go through buying GoPros and then selling them pretty quickly, don't know why but if I have it sit around long enough I end up selling it because I feel bad and know someone else will put it to better use. Not sure. When I called up Ohlin before they didn't think it was necessary to get revalved so quickly. Their intervals are rather short, but I've gone well over 25k miles and haven't had any issues, so it's up to end user to decide when it's time to service them...
I go through buying GoPros and then selling them pretty quickly, don't know why but if I have it sit around long enough I end up selling it because I feel bad and know someone else will put it to better use. Not sure. When I called up Ohlin before they didn't think it was necessary to get revalved so quickly. Their intervals are rather short, but I've gone well over 25k miles and haven't had any issues, so it's up to end user to decide when it's time to service them...Ordered it from PSI, sonoma. with vorshlag plate. Still on backorder, havn't even been charged for it.
Also glad to hear that you are ok without rebuild so far.(manufacturer suggests rebuild every 15000 miles/10hrs of track use as u know)
Last edited by mini_aaron; Mar 28, 2015 at 12:50 AM.
Hyperco 2.5id(i guess) same spring length, rate 400/425. I just searched what spring rate others using for their track biased mini, and applied it to my driving taste... Answer was 400/425.. Donno how it will b tho lol~
Ordered it from PSI, sonoma. with vorshlag plate. Still on backorder, havn't even been charged for it.
Also glad to hear that you are ok without rebuild so far.(manufacturer suggests rebuild every 15000 miles/10hrs of track use as u know)
Ordered it from PSI, sonoma. with vorshlag plate. Still on backorder, havn't even been charged for it.
Also glad to hear that you are ok without rebuild so far.(manufacturer suggests rebuild every 15000 miles/10hrs of track use as u know)
Rebuild every 15k is a bit of an overkill, but then again, that's 15k TRACK miles.