R50/53 Track Day!
Track Day!
Yesterday was opening day for the drag strip(Great Lakes Dragway) so I decided to see what she would run.
first wanted to lose some excess fat! btw, that purse is NOT mine!





times were as follows
__________60' ________1/4 _______trap
run 1 _____2.565 _____14.75 _____96.8
run 2 _____2.5_______ 14.61_____ 94.75
run 3_____ 2.68 ______14.72 _____98.18
run 4 _____2.477 _____14.41 _____99.04
best was 14.4 at 99. for a stock Cooper S + pulley, I'm happy
(stock cooper S runs 15.3 @ 91)
first wanted to lose some excess fat! btw, that purse is NOT mine!
times were as follows
__________60' ________1/4 _______trap
run 1 _____2.565 _____14.75 _____96.8
run 2 _____2.5_______ 14.61_____ 94.75
run 3_____ 2.68 ______14.72 _____98.18
run 4 _____2.477 _____14.41 _____99.04
best was 14.4 at 99. for a stock Cooper S + pulley, I'm happy
(stock cooper S runs 15.3 @ 91)
i was suprised at the increase over stock s(15.5). although, you also have to take into account the weight removed from the car. those couple things probably accumulated to 100lbs.
2 - screws to remove the boot shelf
4 - T-45 torx bolts for the front passenger seat
3 - T-45 torx bolts for the back seat backs
about 15-20 minutes.
if it were your first time, it could take MAYBE an hour
edit: i noticed that this thread was posted after my first track set. I went again and topped my best with a 14.3. that was actually a run a beat an srt-4. I was happy. haha
4 - T-45 torx bolts for the front passenger seat
3 - T-45 torx bolts for the back seat backs
about 15-20 minutes.
if it were your first time, it could take MAYBE an hour
edit: i noticed that this thread was posted after my first track set. I went again and topped my best with a 14.3. that was actually a run a beat an srt-4. I was happy. haha
jcw car (gutted) with a 17% and intake and exhaust runs into the 13's
no time slips...just cars i kno that run 13's that i held with or have taken :P
no time slips...just cars i kno that run 13's that i held with or have taken :P
Trending Topics
Somethings you may find interesting Forum>Thread.
I wish I had known, I'd have gone at least to cheer on the other MINI, and may have been convinced to run (after all my only trip thus far the temp was well over 90 degrees).
Have any info on when they have open track again? I know roughly where the track is and thats fairly close to me here in far northern IL.
I wish I had known, I'd have gone at least to cheer on the other MINI, and may have been convinced to run (after all my only trip thus far the temp was well over 90 degrees).
Have any info on when they have open track again? I know roughly where the track is and thats fairly close to me here in far northern IL.
the track is located in union grove and you're correct, it is not a far shot from norther IL. I believe the only open track times are the openning and closing weeks.
on any other occasion, its a flat $28 to race all night. I am tyring to determine when I will be going back. I have several MINI's already interested in this trip when we go back again. If anyone else in the area is interested, just shoot me a PM or post and ill be sure to keep you posted on when we plan on going back to greatLakes Dragway.
on any other occasion, its a flat $28 to race all night. I am tyring to determine when I will be going back. I have several MINI's already interested in this trip when we go back again. If anyone else in the area is interested, just shoot me a PM or post and ill be sure to keep you posted on when we plan on going back to greatLakes Dragway.
I'll keep an eye out for a thread I much prefer a road course but like to think of the drag strip as an inexpensive dyno as it provides some quantitative #s even if not displaying hp and torque. Also have found there is a very good welcoming crowd at such events.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
Drivetrain Products
1
Sep 9, 2015 01:42 PM
PelicanParts.com
Tires, Wheels & Brakes
1
Sep 9, 2015 01:37 PM
PelicanParts.com
Accessory Products
2
Sep 3, 2015 08:54 AM
M7Speed
R56 :: Hatch Talk (2007+)
0
Sep 3, 2015 07:27 AM



