Hello '07 owners ...

I make a real nice Rear Seat Delete and need to modify my template to be able to make for the '07.

I will make you a RSD for 1/2 price ...
But will need you (OK your car) for just a few hours)
I'll even buy you a beer while you wait

Please contact me with any questions

Brian

Here is the info on the RSDs

>>>

I have a few of the R53, Fiberboard, carpet versions in both Harness and Non Harness on hand.

These are the lightest (other than the non carpet) available.

They come carpeted with BLACK (a bit darker than OEM black) and do include the rear tail section of carpet so that the whole rear end is the same carpet and color.
2 supports are also included to help support weight carrying capacity.
They come with ALL hardware, nothing else needed.
With the supports the fiberboard will support 40 to 50 lbs. This weight does need to be strategically placed and no scientific tests have been done. I Auto –x and do track days and have placed floor jacks, CO2 bottles, tools and, coolers on the RSD.
The first time you remove the seats (I include instructions on how to do it) it may take 10 min... I can do it in 3 or 4 min, and just as quick to reinstall.
This is not a permanent change and you can return to a 4 seater at any time.

The RSD itself is SO easy it drops right in place and has 2 clips

$75 for the NON carpet version and add $25 for the carpet version.
No price difference in harness or NON harness.
A harness board can be made and I will reinsert the part removed for the rear belts, and carpet the full RSD if you want to run harness in the future it is a only a carpet cut and insert removal.

Many carpet and material options are available
I have even done an aluminum diamond plate version.
These options have additional supplies and labor costs.


Just let me know if you have special or different needs.

I do take PayPal to WyvernMini@aol.com
& ship for FREE.

Thanks
Brian

Please check out www.myspace.com/WyvernMini

 

no '07s who wants a RSD ???

 

Hello, I might be interested in a RSD when I get my 08 MCS in January.

 

I WOULD BE INTERESTED IN A RSD TO FIT MY 06 CONVIRTIBLE, I HAVE NOT FOUND IT MADE BY ANYONE!!!!!!!!!!!!!!!!!!!!!

 

When you '08 gets here ...please look me up .

I did one for a convertable ... I didn't make template
It CAN be done ... I would need a cabrio for just a bit to re make.

My plan was to do a RSD and a roll bar (removing the OEM rear roll bar)

 

hey i want to pick up a RSD for my 06 hardtop!. just a plain carpet! do you have one already! i want the one where i can have the harness in the future!.. i dont have full harness yet but still thinkin bout getting one but if you do the the RSD where i can add the harness later that would be great! what other material do you have?

 

PM sent

 

WOULD LIKE TO GET TOGETHER FOR A CARPET COVERED RSD FOR MY O6 CONVERT.
CONTACT ME AT carman3492@comcast.net AND ADVISE WHEN YOU ARE ABLE TO PROCEED.............