cool

 

10.4" vga touchscreen going in the dash (the LCD panel is actually Samsung believe it or not)









runner board for......



.....this

 

Lookin' Good...Man you have some time and money invested in this
Hey...check out my battery thread in the drivetrain section...

 

thanks and i replied in your thread

 

Thanks for the help Pimp...I updated my status...its completely dead and is being replaced in the morning...going Yellow because it is here in town...should work well...just one of those things that has to happen...I know it will pay for itself though

 

you'll be happy with that battery

 

crap, i have to re cut that side piece that fits in the side window area.

i painted the back side of it yesterday so you cant see the wood color through the tint in bright sun, and it was outside drying, and i forgot about it over night, and the dew overnight got it all moist and wet!!!!

 

box = in for good.

glued/screwed it down to the false floor today.

the side panels are just sitting there, i havent put them in yet. gonna get the top piece cut before i screw those 2 window panels in. theres padding on the back as well, where it hit the window a bit.



had a whole sheet of birch, and all i have left is the top/front/port, which wont be a whole sheet, so instead of 2x4s, i added a 2nd layer of 3/4" birch to the back, it made it very solid.

had to 2 piece it









hell, i like how the back is looking better than the front lol.







also, as far as all the 90 degree angles inside the box go....im going to round them all before i fiberglass the entire interior of the box, but the box will be complete before i do so. also, i just want to test the box without glass/rounding the edges, and see how it sounds, and go from there.

 

Wow...WAAAYYYY better than the first
Keep it coming...

What did you decide on the subs? 4/6/8/10...etc...

 

2 18's, if i end up not having enough airspace, ill do 15's.

 

Wow, that is going to be rediculous...
How is you hearing?

Update...my Yellow top is great, absolutely love it...

 

glad you like it

 

I am thinking about swapping my Audiobahns for some Fusions...what do you think...
I know they are not the best, but I love Fusion...I don't need the loudest.
I love the way they move and sound

So, Fusion v.s. Audiobahn...let me hear it

No pun intended...

 

Damn, moving along quickly. Looking good man I wish I knew how to do all this ****. Oh and, had the ***** to rip apart my interior like that lol.

 

id stick with audiobahn.. hit me up in a PM and tell me exactly what you're looking for, your budget, etc, and lets see if we can get you some good subs vs fusion/AB.

haha thanks. i work with what i got.

 

Will do in a bit

 

go big, or go home

1 of 2 18" recone/basket



next to 12" basket



template for the back trim panel. gotta go get some 1/4" birch tomorow, 11 bux for a 4x8 sheet, and it weighs NOTHING lol.

 

Sweet!!! that is HUGE

 

 

starting to come together!!!!

will be 2 layers thick, and a 3rd layer on the outside, which will be the flush panel/trim panel, and have a brace in the center of the 2 subs, from that point, to the floor.

 

so the clam is dead and the tilted wall is here? TEst fit the speakers etc to see if the seats have room. We'd all cry if you had to start a third thread to cover version III....

Matt

 

it fits, im short, the other one I could drive fine. it was the passenger seat, if you were over my height (5 ft 9 in, 140 lbs) you wouldnt be very comfertable. at least now, its angled at 70 degrees, so the back of the seat can be angled as well, not as if there were no wall there, but you have to sacrifice. lol.

new pics uploading now, im EXTREMELY happy with it thus far!!!!

 

cut out the 2nd baffle. and test fit of the basket for the 18

btw, its bent from the factory, so i gotta call up RE and see whats up...someone failed in china, LOL

the money shot!

angle = 70 degrees





foamed up



little gaps that need filling. no big deal,



had to cut it all funky looking, due to the B pillars being only about 45" wide from side to side, and the box is like 47"

trim panel will cover this

 

perfect







the POS basket

 

That's pretty sweet. Can't wait to hear how it sounds. Not literally of course.