Cool deal. Where'd your purge switch/button? If you could post a picture too, that'd be sweet. Since there aren't too many people out there running NO2, I don't have too much to go by. Thanks mang!

 

Sure. I'll take it outside and get some good pics for you....

 

 

Cool setup! I like what you did with the remote bottle opener, pressure guage & bottle warmer. I see where the NO2 module is under your speedo, but where you put your purge button (or switch)? Oh, what's the screen to the left of your speedo? Is it for your Sirius (or XM Radio)?

 

The purge button is on the parcel shelf on the right side. The on/off and remote bottle opener switch is on the left side of the parcel shelf. The thing to the left of my speedo is my GPS.

 

So hows Fresno this morning? It must be a cool 60f at Pismo this morning .

 

Sweeeet. Can you snap a picture of your parcel shelf & post? Oh, on a related note, I've never figured out how to post pictures directly into a post (only as an attachment). Do you upload your pictures to another website & then link? I've done a "how to" search on NAM & haven't found any instructions. Thanks!
Let's see, today in Fresno it's currently 91degrees with temps creeping up to 106degrees by this afternoon. Stay cool Jim!

 

Sure. I will snap a picture tonight. I use imageshack.us to host my images... From there, you just paste the image link into the inage tabs....

 

Awesome! You da man Stan! What've you got planned for your next Mini project?

 

Here you go. The two switches on the left are for power for the whole system and the remote bottle opener. The small red button on the right is purge.

I'm not quite sure what my future project is gona be... I still need to get my vented a pannels painted. I'm also probably going to run a second stage for the nos. And another big project is removing the battery box and putting in a custom exhaust...

 

Thank you *very* much for running outside to snap this picture. Your setup looks good & you don't have wires running everywhere. Plus, other than the module under your speedo- it's nice & discreet in case of any roadside chats about your glowing rotors. Which vented A-panels did you score? The Samtrak version looks hot, but I heard that's a work in process with no immediate end in sight.

 

Still in one piece...I'm impressed...

 

Thanks. The a pannels are the ones Nathan has...

 

How was everyone's Holiday weekend? Mine was full of sitting on a boat drinking cold beer or going airborne on my 215hp Sea-doo

 

The weekend was nice. I stayed home all 3 days and worked on my house.
Cooled down today though.

 

Blake,

When is your 1st class?

 

Hey Blake

Did you take first day of school pictures with your book bag and lunchbox LMAO

 

You should thank me, we brought the cool weather back from Pismo for you.

 

Ok, Thank you

 

Here it is, not glued down yet. It really needs the old glue sanded off and then repainted to look good.

 

This morning... Its a bit early, but the professor is funny and the class should be easy....

 

That looks cool Dr.Steve!
Are you going to spray the module black or do I need to do that? I'm really trying to see if I can break away from the office to come visit you guys. I miss my baby.

 

I think you need a thin piece of foam to give that a little elevation form the steering collumn... If its too low, it will be hard to flick the arm switch on if its too low...

 

I plan on using 3M double sided tape like I used on my front license plate. That should raise it up enough, and, if it's like my front plate, it will never come loose.

Steve

 

You don't want to spray it there. I was more thinking of hobby paint so you could brush it on with a pointy, little paint brush. Or you could get JIMINNI to spray it since he has some experience with painting inside enclosed areas. Be sure to set up an appointment with CruiseControl first, though. Sorry, Jim; cheap shot, I know.

Steve