Drivetrain What kind of improvement we're looking at
Thread Starter
|
6th Gear
Joined: Nov 2005
Posts: 3,911
Likes: 0
From: Ellicott City, MD
What kind of improvement we're looking at
I would like some knowledgeable guess-timate..
From what I already have.
Intake, Exhaust, 15% pulley, plugs,
If I add the following:
New fireball cylinder head, Schrick cam, Madness header + high flow cat, and Custon ECU finetuning. What is the potential, should I reach 210 whp?
From what I already have.
Intake, Exhaust, 15% pulley, plugs,
If I add the following:
New fireball cylinder head, Schrick cam, Madness header + high flow cat, and Custon ECU finetuning. What is the potential, should I reach 210 whp?
6th Gear
Joined: Feb 2006
Posts: 1,299
Likes: 0
I would like some knowledgeable guess-timate..
From what I already have.
Intake, Exhaust, 15% pulley, plugs,
If I add the following:
New fireball cylinder head, Schrick cam, Madness header + high flow cat, and Custon ECU finetuning. What is the potential, should I reach 210 whp?
From what I already have.
Intake, Exhaust, 15% pulley, plugs,
If I add the following:
New fireball cylinder head, Schrick cam, Madness header + high flow cat, and Custon ECU finetuning. What is the potential, should I reach 210 whp?
6th Gear
Joined: Feb 2006
Posts: 1,299
Likes: 0
...and DMH...I bet either one would take a lot of pride in your car and do a great job.
210whp is very possible, thats what I got with the Fireballed head. I think the record holder is 226whp at 8k rpm with a perfect tune done on the dyno and a laptop when driving around. Make sure you get a good tune and not just a flash. I learned the hard way
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
Hi, You have used JCW, dealer installed ECU upgrades and dynoed at 210hp at the wheels? Cool
I'm in Iowa and there is no one that does these things less than about 900+++ miles away except a Mini dealer .It would be nice to think that Knuaz in Chicago could do it.
I'm in Iowa and there is no one that does these things less than about 900+++ miles away except a Mini dealer .It would be nice to think that Knuaz in Chicago could do it.Trending Topics
5th Gear
Joined: May 2004
Posts: 1,088
Likes: 2
From: out and aboot
228whp... checking in...
Hey Justin, I gave you a call yesterday but no pick up. I was wondering if you could help me speed up the CP pistons? They need to be 20 over.
thank you
M
thank you
M
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
Coordinator :: Hawaii MINI Motoring Club
Joined: Mar 2005
Posts: 626
Likes: 0
From: Austin, Texas - U.S.A.
where 2 get software
--Hey MarioKart where did you get your software and cables for your laptop ecu tuning? I've been looking high and low for something where I can mess with air and fuel but all I find are these shake and bake instant flash type kits. Please let me know if you can hep. Thanks!
~pyratio
~pyratio
5th Gear
Joined: Sep 2005
Posts: 643
Likes: 0
From: Tampa, FL
The only JCW stuff I have as far as the engine is concerned is the injectors and ecu software. The SBK, Suspension, and spoiler do little to help
Seriously, there are some things to consider. For me the JCW update was good, but it still has the car a little leaner than I like, but for street driving it is spot on 12.5-12.8 WOT, 14.7-15.3 cruise and idle. I am in the process of obtaining a EGT sensor to get a better look. If my EGT's are still high after the addition of the methanol/water injection, then I am going to look at other options.
Thread
Thread Starter
Forum
Replies
Last Post
Emnotek
Vendor Announcements
0
Sep 29, 2015 07:37 AM