Drivetrain Help Guys, I need to find out where the rev counter wire is in the ecu or anywhere
Help Guys, I need to find out where the rev counter wire is in the ecu or anywhere
Hi,
I am fitting an aftermarket tacho meter ( rev counter ). I cant find the rev counter wire from the ecu and u cant run a wire from the stock rev counter. I tired using the coil pulse wires the mini system is a twin pulse wire which cuts and cause the engine to run badly when u join a 1 wire from the rev counter to the two pulse wires. Is there any other way to get it working. Does anyone here have the ECU diagram.
From dave
I am fitting an aftermarket tacho meter ( rev counter ). I cant find the rev counter wire from the ecu and u cant run a wire from the stock rev counter. I tired using the coil pulse wires the mini system is a twin pulse wire which cuts and cause the engine to run badly when u join a 1 wire from the rev counter to the two pulse wires. Is there any other way to get it working. Does anyone here have the ECU diagram.
From dave
The Engine Speed Sensor Signal wire is pin 54 (the ground for that is pin 73), though it comes from the transmision rpm sensor so I'm not sure if it is engine rpm or tranny output rpm, you can test that though. I also use a converter that connects to the coil pack instead of cutting into your ecu harness area. I have it available, just send me an e-mail. dan@piloracing.com
http://www.piloracing.com/shop/prodd...ADAPTER&cat=24
http://www.piloracing.com/shop/prodd...ADAPTER&cat=24
Last edited by MiniPilo; Dec 22, 2004 at 08:49 PM.
Originally Posted by andy@ross-tech.com
Depenting on what you are looking for, that looks like a rusable solution for getting a Tachomoter signal. 

It's more effective to just say there is a mistype on the website, Just remember there are always 2 way's to do things..
Originally Posted by MiniPilo
Hey Andy,
It's more effective to just say there is a mistype on the website, Just remember there are always 2 way's to do things..
It's more effective to just say there is a mistype on the website, Just remember there are always 2 way's to do things..
Trending Topics
Originally Posted by andy@ross-tech.com
My advice is to stick to copying and pasting text from eBay ads for Megan Racing products. No sense in reinventing the wheel when it comes to text for your website. 
I already added to the topic, giving a recommendation for wahwah to buy the product from your website! I even used your exact words and the spelling from your website. What more could you ask for?
BTW, which of your two products are from Megan Racing? Is the short shifter one of them?
BTW, which of your two products are from Megan Racing? Is the short shifter one of them?
Thread
Thread Starter
Forum
Replies
Last Post
JHolland
R56 :: Hatch Talk (2007+)
1
Aug 13, 2015 10:47 PM
Drivetrain Won't hold idle after work performed
Lt. Dan
Drivetrain (Cooper S)
4
Aug 10, 2015 08:23 AM



