Drivetrain Full Flash via OBD2 has arrived for the MINI-F56 Platform
#79
#80
#81
#82
Group Buy is full!
Hi All, just a quick update: the Group Buy is now full. Units will start to ship out on 12/28/17 via FedEx and we will commence tuning after 1/2/2018.
The current version of the FlashAccess software will expire on 12/31/2017; so we want everyone to use the new version of the software that will be available on (or after) 1/1/2018.
Thank you all for your support!!! We have many more products to come in 2018
Our tuning affiliate shop in the UK (1320MINI) ran their 2015-S Manual down the 1/4 back in April of 2017 and they managed to hit 107MPH at 13.55 seconds on a full tank of 98 RON V-Power.
The mods were: BT Stage 1 Tune, Airtec Intercooler, JCW Exhaust, running 18 PSI. Time slip below...
1320MINI Shop F56 (2015-S Manual, BT Tuned, 18 PSI, Airtec IC, JCW Exhaust)
The current version of the FlashAccess software will expire on 12/31/2017; so we want everyone to use the new version of the software that will be available on (or after) 1/1/2018.
Thank you all for your support!!! We have many more products to come in 2018
The mods were: BT Stage 1 Tune, Airtec Intercooler, JCW Exhaust, running 18 PSI. Time slip below...
1320MINI Shop F56 (2015-S Manual, BT Tuned, 18 PSI, Airtec IC, JCW Exhaust)
The following users liked this post:
vetsvette (12-28-2017)
#84
#85
BTW guys, don't forget to get a hold of a 12-point thin-wall spark plug tool. We ordered a big batch, but those won't arrive our shop until mid-January. sorry :(
#86
Do we need a gap tool for the plugs aswell or am I over thinking things?
#87
#89
This? - Spark Plug Socket Thin Wall for BMW Mercedes Nissan 3/8" Drive 12-Point/14mm
#90
The following users liked this post:
ECSTuning (12-29-2017)
#91
#92
14mm right?
This? - Spark Plug Socket Thin Wall for BMW Mercedes Nissan 3/8" Drive 12-Point/14mm https://www.amazon.com/dp/B01MZ3IW1P..._wNHrAbD3H93TW
This? - Spark Plug Socket Thin Wall for BMW Mercedes Nissan 3/8" Drive 12-Point/14mm https://www.amazon.com/dp/B01MZ3IW1P..._wNHrAbD3H93TW
#93
#94
We do it in the ECU mappings. Once you have the tune and the pops and bangs are too loud, then simply let us know and we can turn it down a bit and send you a revise tune. Thus far, we haven't had one customer who has requested this yet; all of them wanted more pops and bangs - and not less
#96
https://www.ecstuning.com/b-schwaben.../001247sch01a/
There are , I'm told, tools from Autozone and the like that will work. I was ordering 5 liters of oil and a Mann filter from them anyway so I just added the tool and got the free shipping.
There are , I'm told, tools from Autozone and the like that will work. I was ordering 5 liters of oil and a Mann filter from them anyway so I just added the tool and got the free shipping.
The following users liked this post:
ECSTuning (12-29-2017)
#97
The following users liked this post:
ECSTuning (12-29-2017)
#98
#99
Well, I picked a heck of a time for the usual pre-Christmas busy-ness. Haven't checked in on NAM in a few weeks, finally got some time for myself and came in for a leisurely read of my favorite MINI community... and discovered I missed out on a great group buy!
Hope you lucky ten enjoy the new tunes!
Hope you lucky ten enjoy the new tunes!
#100
Tuning preparation...
Hi all, we'll be back to work tomorrow (Tuesday), but for the mean time, if you have already received your FlashAccess OBD Module, you can get ready by doing the following:
- Go to the Bytetronik Downloads and download FlashAccess ECU Installation Guide v.4
- Also download the FlashAccess Software Version 8044 and install this onto your PC.
- Read through the instructions and get a clear understanding on the process.
- Email us your "Detailed ECU info" per Chapter 2 of the Installation Guide.
- We'll send you the tune files tomorrow once we get back into the office.