Drivetrain Seattle RMW tune @ Speed Factory!!! June 19th, 20th, 21st
Joined: Jul 2006
Posts: 557
Likes: 0
From: Anacortes Washington
Seattle RMW tune @ Speed Factory!!! June 19th, 20th, 21st
It is confirmed that Jan will be in Seattle June 19th, 20th, 21rst and 22nd at SpeedFactory. Click the link for homepage/location. It's south of Seattle in Tacoma. http://www.speedfactoryracing.net
It will cost $90 per hour and $350 for the tune.
Tuning will begin at 8 am with each car taking around an hour and a half, get there early!
Here is the list of participants so far,
Thursday 19th
-JeffC2
-Fingershooter
-Pure13
-Searocko
-Scurvz
-BFG9000
-Joe_R
-Ear2ear
Friday 20th
-Rorik
-Theweescot
-Jpit
-Custard
-Project7
-StealthR53
-Scooop
-Michaele -----------------Cancellation!!!!!!!!!!!!!!!!
-Pat.hillyer
Saturday 21rst
-Bilzcat
-ScottinBend
-ED955S
-Shooler
-OSUBeaver
-ClintTheMiniOwner
-CosmicTraveler
-Sanderskog
-Hagrew
Sunday
I have taken the cars off the sunday list because Jan believes he can get to 10 per day. Sunday is now for overflow or technical problem re-dos and that kind of stuff.
It will cost $90 per hour and $350 for the tune.
Tuning will begin at 8 am with each car taking around an hour and a half, get there early!
Here is the list of participants so far,
Thursday 19th
-JeffC2
-Fingershooter
-Pure13
-Searocko
-Scurvz
-BFG9000
-Joe_R
-Ear2ear
Friday 20th
-Rorik
-Theweescot
-Jpit
-Custard
-Project7
-StealthR53
-Scooop
-Michaele -----------------Cancellation!!!!!!!!!!!!!!!!
-Pat.hillyer
Saturday 21rst
-Bilzcat
-ScottinBend
-ED955S
-Shooler
-OSUBeaver
-ClintTheMiniOwner
-CosmicTraveler
-Sanderskog
-Hagrew
Sunday
I have taken the cars off the sunday list because Jan believes he can get to 10 per day. Sunday is now for overflow or technical problem re-dos and that kind of stuff.
Last edited by ClintTheMiniOwner; Jun 18, 2008 at 10:04 AM. Reason: Schedule change
Just a heads up......you can't google the University Place addy, it needs to be looked up as a Tacoma addy.
Here is a link to a google map
Thanks Clint for organizing this!
Custard, do you mind if I switch spots with you? Since tuning begins at 8am, and each car takes about 1.5hr each, I'm guessing it'll be my turn at around 12:30pm the way we're line up currently. But because I'm driving down from Vancouver, and I really don't want any unexpected delays to cause chaos for everyone, 2pm would really be a better time for me. Let me know!
Custard, do you mind if I switch spots with you? Since tuning begins at 8am, and each car takes about 1.5hr each, I'm guessing it'll be my turn at around 12:30pm the way we're line up currently. But because I'm driving down from Vancouver, and I really don't want any unexpected delays to cause chaos for everyone, 2pm would really be a better time for me. Let me know!
Joined: Jul 2006
Posts: 557
Likes: 0
From: Anacortes Washington
Trending Topics
Yes! I owned a 1980, purchased new when I was in college, and I ended up selling it 2 years ago when I moved.
It was sitting in the garage for 6 years and I had plans to restore it someday. It had a bad case of rust in all the usual spots and since it spent the first 5 years in Hawaii, the salt air only accelerated the corrosion. Well, you know how plans change so I sold it to a VW crazy high school kid. It was a great car and at one point it had a Stage 3 Callaway turbo kit. FUN!
My screen name goes back to the early AOL days. "Scirocco" was taken so I had to get creative.
It was sitting in the garage for 6 years and I had plans to restore it someday. It had a bad case of rust in all the usual spots and since it spent the first 5 years in Hawaii, the salt air only accelerated the corrosion. Well, you know how plans change so I sold it to a VW crazy high school kid. It was a great car and at one point it had a Stage 3 Callaway turbo kit. FUN! My screen name goes back to the early AOL days. "Scirocco" was taken so I had to get creative.
That is so cool.........!
I bought a '78 new and had it for 25 yrs before selling it to a local high schooler ( who subsequently trashed it........
) to get my MCS! Lots of mods on my "rocco too.
I miss it to this day.
I bought a '78 new and had it for 25 yrs before selling it to a local high schooler ( who subsequently trashed it........
) to get my MCS! Lots of mods on my "rocco too.I miss it to this day.
Cool, I kept mine for over 25 years too. I miss mine but then I think about the lack of 'rocco specific parts and it softens the blow a little. Still, it would've been nice to restore it. You rarely see any of the MK1s anymore.
Joined: Jul 2006
Posts: 557
Likes: 0
From: Anacortes Washington
I think its about time I become a PSmini member!
Scooop, I look forward to seeing your numbers. I have high hopes
Scooop, I look forward to seeing your numbers. I have high hopes
Last edited by ClintTheMiniOwner; May 11, 2008 at 10:42 PM.
Joined: Jul 2006
Posts: 557
Likes: 0
From: Anacortes Washington
1. over half the hole showing in the tensioner
2. new plugs , if running more than 17% use NGK -7s or 8s
3. 91 octane gas, Chevron is usually the best
4. make sure your boots on intercooler are not worn/torn/old
5. Make sure you have no check engine lights
6. make sure your exhaust is NOT leaking
7. clean air filter
8. enough oil and coolant
9. non slipping clutch
10. 380cc injectors if 19% or 15/3% or 15/2 or 17/2 etc
if you plan on running your car on the track it's always better to have 380cc injectors over the stockers
Keep checking in with the list on the first post. I make changes often.
Last edited by ClintTheMiniOwner; May 12, 2008 at 12:35 PM.
Mark,
It will be interesting to see where you end up after Jan gets hold of your car. Definitely room for improvement on those A/F ratios.
I see Coll is signed up now huh? What's up Coll...not good enough to be at the top of the heap?!?!
It will be interesting to see where you end up after Jan gets hold of your car. Definitely room for improvement on those A/F ratios.
I see Coll is signed up now huh? What's up Coll...not good enough to be at the top of the heap?!?!
Thanks, Clint. If I understand the scheduling correctly, I'm second up on Friday, June 20th. So if I'm at the SpeedFactory by 9:00 AM, I should be "early" for my appointment. Please correct me if this is wrong, otherwise I'll follow this plan. Can't wait ..........


