Drivetrain Gintani Aftercooler Program
Thread Starter
|
Banned
Joined: Nov 2007
Posts: 131
Likes: 0
NOTHING..........IT WAS TO CLEAR UP WHOS WHO. NO PUN INTENDED!!!!!!!
Instead of making this a **** session, why not ask me relevant questions like what type of cores do you use, whats your manifold made of etc etc.
Instead of making this a **** session, why not ask me relevant questions like what type of cores do you use, whats your manifold made of etc etc.
Vendor & Moderator :: MINI Camera and Video & c3 club forum
iTrader: (6)
Aww, we are in agreement. That's all I was saying before. MINICorsa--Danny is a one man, or two man shop. He doesn't need a 15,000 sf facility to do his work. I'm also a one man shop--well sometimes I have assistants--and things are more cramped--but that's besides the point.
If your point of posting the pictures was to clarify who the players were and not to belittle them that you have a bigger place than they do, fine--then state that. But everything in this thread has been about who is faster, better, more powerful---it just didn't seem Kosher that that was the only motive for "clarifying" the situation....but if that's all you meant, then fine.
Richard
If your point of posting the pictures was to clarify who the players were and not to belittle them that you have a bigger place than they do, fine--then state that. But everything in this thread has been about who is faster, better, more powerful---it just didn't seem Kosher that that was the only motive for "clarifying" the situation....but if that's all you meant, then fine.
Richard
Well im happy for you to be able to rent your portion of what looks like a nice place. Having space this size is a requirement for us. I am sure as your business grows you will move into your own space that better suits your business, however this building suits our business.
Thread Starter
|
Banned
Joined: Nov 2007
Posts: 131
Likes: 0
In all honesty clarification was its only intended purpose. I would love to post more pictures of the interior of our shop not to brag or showoff but to show what kind of development goes on in here. I feel that this is the only way to get to know us better but you guys please cut us a break we started off on the wrong foot per se.
Banned
Joined: Nov 2006
Posts: 4,862
Likes: 3
From: Fresno Ca.
In all honesty clarification was its only intended purpose. I would love to post more pictures of the interior of our shop not to brag or showoff but to show what kind of development goes on in here. I feel that this is the only way to get to know us better but you guys please cut us a break we started off on the wrong foot per se.
Peace Keeper
Joined: Dec 2006
Posts: 2,747
Likes: 1
From: Defiance, Ohio
Well I wanted to clear some things up...We received many emails regarding this very subject. These pictures are only intended to clear things up. Gintani does not want anymore problems. We are here to answer any questions about our products or ideas you may have regarding your Mini. Hope this sorts all the confusion.
Seems to me that we have a stalker on this board!
But, seriously...Why show Mini Corsa? If your point was to remove yourself from RMS, what does Danny have to do with this?
I think someone is trying to compensate for something by showing us their huge building...
What was the reason for not opting for a laminova core?[/quote]
[quote=GINTANI;2026443]NOTHING..........IT WAS TO CLEAR UP WHOS WHO. NO PUN INTENDED!!!!!!!
Instead of making this a **** session, why not ask me relevant questions like what type of cores do you use, whats your manifold made of etc etc.[/quote]
Can you please answer the above questions.
Thank you.
Longboard
North American Motoring :: Founder
Joined: Jan 2002
Posts: 3,070
Likes: 0
From: Colorado
And we're done...
Frankly I'm disappointed in this whole thread. A new vendor came on, we had another vendor post to it, vendors went after each other, questions of credibility come into play, and we finish up with showing off brick and mortar locations all the while delivering a caning to all involved.
While I know that things here (NAM) are not always pleasant I have always intended that the site be used by members and vendors to discuss, research, and draw their own conclusions on every facet of MINI ownership. I DO NOT relish having to step in to any thread and try to steer it back onto level ground. At this point we're so far askew that there is no other course to take but to lock and ultimately remove this from public view. Emotions have gotten too high and the points being made too low.
As much as dislike having to put rules in place its probably time to do so. In the next few weeks I'll be putting out some new guidelines for vendors based on how they use the site relative to other vendors.
For the time being its time for everyone to cool off a bit and take a walk around the park.
Mark
Frankly I'm disappointed in this whole thread. A new vendor came on, we had another vendor post to it, vendors went after each other, questions of credibility come into play, and we finish up with showing off brick and mortar locations all the while delivering a caning to all involved.
While I know that things here (NAM) are not always pleasant I have always intended that the site be used by members and vendors to discuss, research, and draw their own conclusions on every facet of MINI ownership. I DO NOT relish having to step in to any thread and try to steer it back onto level ground. At this point we're so far askew that there is no other course to take but to lock and ultimately remove this from public view. Emotions have gotten too high and the points being made too low.
As much as dislike having to put rules in place its probably time to do so. In the next few weeks I'll be putting out some new guidelines for vendors based on how they use the site relative to other vendors.
For the time being its time for everyone to cool off a bit and take a walk around the park.
Mark
Thread
Thread Starter
Forum
Replies
Last Post
Navigation & Audio Installing the PAC SWI-RC Steering Wheel Control Interface
Filmy
Navigation & Audio
6
Jun 28, 2016 08:58 AM