I love my CMSALL4 but I want to make it more enjoying to drive!!! I'm in NC anyone know who can help me? I got an intake, exhaust , coilovers, but I want more hp ....

 

South Florida is your ticket from NC.

 

Any particular tuner? Name?

 

Maybe you should try searching.

 

Search PAW Precision Auto Worxs in Miami.

 

No really??? I have searched and found several sources, but the purpose of this forums is to share info and knowledge!!! NOT to be a smartass.....

 

.

 

Whatever

 

Pidge can be a horses rear about people not searching first. Try looking at PAW and Renntech. People seem happy with both. Renntech is expensive though.

 

Thanks! I looked at renntech....$950?

 

Gotta pay to play....cars that can be tuned through the odb2 cost $350-650, newer ECU's are more!!
And remember, you will likely VOID your warranty, and you MIGHT gain hp ...the amount is not guaranteed. On my dyno day for a r53....some folks gained 5 HP, some 20hp, some more like 50 HP.....r56 gains were similar in variability....even with similar mods.

 

Take a look at NM as well if you have a manual. Its $500 shipped there. Stage 1 or 2. PAW is good too! Other than that it's up to you who you go with.

 

Seems to me the OP was a lazy horse's rear. There are multiple of threads in the mods section. LAZY. it literally took 5 seconds to find these threads.

https://www.northamericanmotoring.co...nce-tunes.html

https://www.northamericanmotoring.co...highlight=Tune

https://www.northamericanmotoring.co...highlight=Tune

 

Exactly.

 

Face it, there are 6 billion people in the world. I doubt even a 1/30000 rd would use a search tool or know how. Why be an *** and why try to set them straight. The thread is still there, it ain't going anywhere. Either answer or move on. Kharma is a bit**.

 

Are you friggin serious? Is searching THAT difficult?

So you think multiple threads with separate discussions on a similar subject is better than focusing that info into one?

If so, those people suck at the Internet.

The thread on N18 tuning is proof enough how one thread can be the source of so much information. And that thread pops up at the top of a simple search. There are literally dozens of pages of discussions on pros and cons on each tune option.

But yeah, you're right. Lets be sympathetic of the lazy ones.

 

Yep, that is what I said and like I said the thread is already there and it ain't gonna go anywhere. I will continue to either ignore the thread or answer them. I might say go ahead and point them to the most common thread, but being a jerk is just stupid.

 

WOW I'm lazy, stupid, etc....but instead of giving a simple answer YOU write a half page essay ....

 

This MCS owner is agreeing with the Pidge...

 

Try Danny at

DRM Motorworx
1019 Investment Blvd. Suite 105
Apex, NC 27502

+1 (919) 607-2242

They use ETG ecu tuning group.

 

Thank you ALL for your input!! I have found that EURO-WISE in Charlotte NC does tune the CPU along with anything else anyone might desire! Called and made appt !! Can't wait!!!!!

 

Glad to hear. Will it be dynoed? Keep us posted on your results and good luck.

 

are they going to do a before and after dyno ? to see what are the gains?