Way Motor Works at MOTD

Old Jan 9, 2008 | 09:09 AM
  #1  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
Way Motor Works at MOTD

Way Motor Works will again be at the Dragon this year Apr 30th-May 4th. Yeah I know it's a bit early in the year to post this, but can't let chad be all by himself We will be doing all of our Installs from pullies to swaybars and everything in between. We will also have our Famous USED Parts Table we've had in the past. I'll keep this thread updated as it gets closer but feel free to set up an appointment anytime. We ran out of slots last year, and don't want to turn anyone away again.

Thanks
WAY
www.waymotorworks.com
317.201.8670
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex

Last edited by MINIGURU@WAY MOTOR WORKS; Jan 9, 2008 at 09:13 AM.
Reply
Old Jan 24, 2008 | 08:50 AM
  #2  
ImagoX's Avatar
ImagoX
6th Gear
Joined: Jun 2006
Posts: 5,692
Likes: 2
Looking forward to checking out your table, Way. Will you have anything used for classics, or just for MINIs?
 
Reply
Old Feb 11, 2008 | 07:17 AM
  #3  
hogtrader's Avatar
hogtrader
2nd Gear
Joined: May 2005
Posts: 71
Likes: 0
From: Lake Placid, FL
Appointment needed

Way,
I sent you a request to your email and haven't heard from you. See PM.
hogtrader
 
Reply
Old Feb 11, 2008 | 07:23 AM
  #4  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
I'll send you a pm, I've had email problems with switching over to the new website. Sorry
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Mar 23, 2008 | 05:59 PM
  #5  
jbobp's Avatar
jbobp
2nd Gear
Joined: Sep 2005
Posts: 108
Likes: 0
From: Canton, GA
At MOTD ’07 I had Way install a cold air intake on my Cooper and it’s been great. One of the best mods for a Cooper.
 
Reply
Old Apr 3, 2008 | 07:54 PM
  #6  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
We still have several openings for install appointments. Please sign up early so I can keep my guys scheduled.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Apr 4, 2008 | 03:21 PM
  #7  
CRasH180's Avatar
CRasH180
1st Gear
Joined: Feb 2007
Posts: 37
Likes: 0
From: Nashville, TN
I thought about getting a new exhaust and a cold air intake for my '05 Cooper S. We'll see...
 
Reply
Old Apr 4, 2008 | 03:38 PM
  #8  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
Originally Posted by CRasH180
I thought about getting a new exhaust and a cold air intake for my '05 Cooper S. We'll see...
You can stop by my Atlanta shop and get it before hand.

But if you can't, I actually found out today that I'll be able to bring a couple Milltek Exhausts to install at the Dragon. I only have a couple so first come first serve.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Apr 7, 2008 | 04:02 AM
  #9  
davavd's Avatar
davavd
6th Gear
iTrader: (2)
Joined: Sep 2006
Posts: 1,506
Likes: 1
From: Covington, Louisiana
While you're doing my swaybar on Friday morning, how much more would it be to do a Mini-do-more hitch, since it looks like he won't be doing installs?
 
Reply
Old Apr 7, 2008 | 07:00 AM
  #10  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
Give me a call and we'll figure out what it would take.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Apr 12, 2008 | 12:57 PM
  #11  
Tricky Fish's Avatar
Tricky Fish
4th Gear
Joined: Feb 2006
Posts: 411
Likes: 0
From: Tallahassee, FL
I'm at about 50k miles (a few autox's and dragons in there) and need to replace my brakes before the dragon or very early at the dragon. I could just get the basic parts and do it myself, but since I'm spending the money, I figure why not throw in a few extra bucks for an even better brake system. So my question is, do you have time to fit me in on Thursday or Friday, what should I get (mostly highway, autocross, dragons, hopefully future track days), and how much will it cost me?
 
Reply
Old Apr 12, 2008 | 05:45 PM
  #12  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
I can fit you in no problem as I still have open slots for installs. Give me a call and we'll put together a package that will work for you for a good price.

WAY
317.201.8670
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Apr 12, 2008 | 05:58 PM
  #13  
MiniMac2005's Avatar
MiniMac2005
6th Gear
Joined: Sep 2005
Posts: 3,047
Likes: 0
From: Chicago.. yes, Chicago
hey Way! Still lovin' the intake from last year We'll see you again at the Dragon... do I need to bring my checkbook again???
 
Reply
Old Apr 12, 2008 | 06:39 PM
  #14  
old81's Avatar
old81
M6
iTrader: (1)
Joined: May 2007
Posts: 7,440
Likes: 0
From: Louisville, Colorado
I had Way and his guys install a DDM CAI and 19mm rear-bar at AMVIV. Best service and great product. Get on the schedule.

I was scheduled for Saturday morning, when I arrived in early afternoon on Thursday, Way insisted I bring the R56 over to have the CAI installed early so I could enjoy it on some of the desert runs.

Wow, was I glad, a world of difference in my MCSa, very fun to listen too. A nice little power gain too.
 
Reply
Old Apr 13, 2008 | 01:48 PM
  #15  
surreptitious's Avatar
surreptitious
2nd Gear
Joined: Sep 2006
Posts: 61
Likes: 0
Would it be possible to bring a couple or (several) sets of your WMW Brake Ducts (r53), http://www.waymotorworks.com/product...cat=286&page=1
I really would like see them in person, And would hope for a Special "Dragon" Cost, no tax (Hint, Hint), After seeing "gnatster " modded Aero bumper install, and can't wait to see his car in person, I want a set, Just thinking about it. Looking forward to seeing your goodies, Thanks
 
Reply
Old Apr 14, 2008 | 06:18 AM
  #16  
hogtrader's Avatar
hogtrader
2nd Gear
Joined: May 2005
Posts: 71
Likes: 0
From: Lake Placid, FL
Time to figure what it will cost me

Hey Way,

It's time for you to tell me what part of my body you want for payment (arm, leg, lung, etc.).

I haven't heard from you for a coupl'a months and we need to finalize our install plans.

Get in touch when you get a chance.

Thanx,
hogtrader
 
Reply
Old Apr 14, 2008 | 08:04 AM
  #17  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
Originally Posted by surreptitious
Would it be possible to bring a couple or (several) sets of your WMW Brake Ducts (r53), http://www.waymotorworks.com/product...cat=286&page=1
I really would like see them in person, And would hope for a Special "Dragon" Cost, no tax (Hint, Hint), After seeing "gnatster " modded Aero bumper install, and can't wait to see his car in person, I want a set, Just thinking about it. Looking forward to seeing your goodies, Thanks
Yes I'll be bringing a couple sets of Brake ducts. I also now offer them for the GP without the scoops for $225.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Apr 21, 2008 | 01:45 PM
  #18  
mikesMINI's Avatar
mikesMINI
2nd Gear
Joined: Oct 2004
Posts: 87
Likes: 0
Way, think you might have time to install my WMW swaybar links?
 
Reply
Old Apr 24, 2008 | 04:22 PM
  #19  
arch-r's Avatar
arch-r
1st Gear
Joined: Oct 2005
Posts: 44
Likes: 0
From: Baton Rouge
sport track install

We talked earlier by phone re: sport track install on my 05 MCS. Just wanted you to know, I will be there on Wednesday around noon. After I check in I will deliver my MINI for you to do your thing. See you there.
 
Reply
Old Apr 24, 2008 | 06:22 PM
  #20  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
Mike, We can install your endlinks, but can't dial them in exact without level ground.

Sport link install on Wed, is no problem
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Apr 27, 2008 | 06:13 AM
  #21  
mikesMINI's Avatar
mikesMINI
2nd Gear
Joined: Oct 2004
Posts: 87
Likes: 0
We will be getting in on Wednesday afternoon. I will check with you for a time. Now if I can just get the sport link installed on Wanda's car the world would be right again.
 
Reply
Old Apr 29, 2008 | 08:28 PM
  #22  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Thread Starter
|
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
We're hear and ready. See everyone tomorrow.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Apr 29, 2008 | 10:48 PM
  #23  
CRasH180's Avatar
CRasH180
1st Gear
Joined: Feb 2007
Posts: 37
Likes: 0
From: Nashville, TN
See you there. I don't think I am going to have any money available for any upgrades this year. I bought the Carbotech Bobcat brakes and while working on my car a few days ago seem to have lost the key to my wheel lock. Wish there was an easier way to get the wheel lock off. Then again, it would not be a wheel lock if you could easily unlock it.
 
Reply
Old May 1, 2008 | 03:46 AM
  #24  
blalor's Avatar
blalor
6th Gear
Joined: Jan 2005
Posts: 1,231
Likes: 0
From: RVA
Originally Posted by CRasH180
See you there. I don't think I am going to have any money available for any upgrades this year. I bought the Carbotech Bobcat brakes and while working on my car a few days ago seem to have lost the key to my wheel lock. Wish there was an easier way to get the wheel lock off. Then again, it would not be a wheel lock if you could easily unlock it.
Check the tool kit in the boot next to the battery. My car has a spare wheel lock key in there that I didn't know about until I had to dig out the tow hook to get pulled out of a snow bank. I don't know if the dealer put it there when I took delivery or if every car comes with one...
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
W0TM8
General MINI Talk
23
Dec 19, 2019 07:50 AM
PelicanParts.com
Vendor Announcements
0
Aug 14, 2015 11:07 AM
Emnotek
Vendor Announcements
0
Aug 13, 2015 05:47 PM
minipopkart
R50/R53 :: Hatch Talk (2002-2006)
2
Aug 13, 2015 05:22 AM
WayMotorWorks
Vendor Announcements
0
Aug 4, 2015 01:47 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 04:32 AM.