Way Motor Works at MOTD

  #1  
Old 01-09-2008, 09:09 AM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
Way Motor Works at MOTD

Way Motor Works will again be at the Dragon this year Apr 30th-May 4th. Yeah I know it's a bit early in the year to post this, but can't let chad be all by himself We will be doing all of our Installs from pullies to swaybars and everything in between. We will also have our Famous USED Parts Table we've had in the past. I'll keep this thread updated as it gets closer but feel free to set up an appointment anytime. We ran out of slots last year, and don't want to turn anyone away again.

Thanks
WAY
www.waymotorworks.com
317.201.8670
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex

Last edited by [email protected] MOTOR WORKS; 01-09-2008 at 09:13 AM.
  #2  
Old 01-24-2008, 08:50 AM
ImagoX's Avatar
ImagoX
ImagoX is offline
6th Gear
Join Date: Jun 2006
Posts: 5,692
Likes: 0
Received 2 Likes on 2 Posts
Looking forward to checking out your table, Way. Will you have anything used for classics, or just for MINIs?
 
  #3  
Old 02-11-2008, 07:17 AM
hogtrader's Avatar
hogtrader
hogtrader is offline
2nd Gear
Join Date: May 2005
Location: Lake Placid, FL
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Appointment needed

Way,
I sent you a request to your email and haven't heard from you. See PM.
hogtrader
 
  #4  
Old 02-11-2008, 07:23 AM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
I'll send you a pm, I've had email problems with switching over to the new website. Sorry
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
  #5  
Old 03-23-2008, 05:59 PM
jbobp's Avatar
jbobp
jbobp is offline
2nd Gear
Join Date: Sep 2005
Location: Canton, GA
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
At MOTD ’07 I had Way install a cold air intake on my Cooper and it’s been great. One of the best mods for a Cooper.
 
  #6  
Old 04-03-2008, 07:54 PM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
We still have several openings for install appointments. Please sign up early so I can keep my guys scheduled.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
  #7  
Old 04-04-2008, 03:21 PM
CRasH180's Avatar
CRasH180
CRasH180 is offline
1st Gear
Join Date: Feb 2007
Location: Nashville, TN
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
I thought about getting a new exhaust and a cold air intake for my '05 Cooper S. We'll see...
 
  #8  
Old 04-04-2008, 03:38 PM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CRasH180 View Post
I thought about getting a new exhaust and a cold air intake for my '05 Cooper S. We'll see...
You can stop by my Atlanta shop and get it before hand.

But if you can't, I actually found out today that I'll be able to bring a couple Milltek Exhausts to install at the Dragon. I only have a couple so first come first serve.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
  #9  
Old 04-07-2008, 04:02 AM
davavd's Avatar
davavd
davavd is offline
6th Gear
iTrader: (2)
Join Date: Sep 2006
Location: Covington, Louisiana
Posts: 1,506
Likes: 0
Received 0 Likes on 0 Posts
While you're doing my swaybar on Friday morning, how much more would it be to do a Mini-do-more hitch, since it looks like he won't be doing installs?
 
  #10  
Old 04-07-2008, 07:00 AM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
Give me a call and we'll figure out what it would take.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
  #11  
Old 04-12-2008, 12:57 PM
Tricky Fish's Avatar
Tricky Fish
Tricky Fish is offline
4th Gear
Join Date: Feb 2006
Location: Tallahassee, FL
Posts: 411
Likes: 0
Received 0 Likes on 0 Posts
I'm at about 50k miles (a few autox's and dragons in there) and need to replace my brakes before the dragon or very early at the dragon. I could just get the basic parts and do it myself, but since I'm spending the money, I figure why not throw in a few extra bucks for an even better brake system. So my question is, do you have time to fit me in on Thursday or Friday, what should I get (mostly highway, autocross, dragons, hopefully future track days), and how much will it cost me?
 
  #12  
Old 04-12-2008, 05:45 PM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
I can fit you in no problem as I still have open slots for installs. Give me a call and we'll put together a package that will work for you for a good price.

WAY
317.201.8670
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
  #13  
Old 04-12-2008, 05:58 PM
MiniMac2005's Avatar
MiniMac2005
MiniMac2005 is offline
6th Gear
Join Date: Sep 2005
Location: Chicago.. yes, Chicago
Posts: 3,047
Likes: 0
Received 0 Likes on 0 Posts
hey Way! Still lovin' the intake from last year We'll see you again at the Dragon... do I need to bring my checkbook again???
 
  #14  
Old 04-12-2008, 06:39 PM
old81
old81 is offline
M6
iTrader: (1)
Join Date: May 2007
Location: Louisville, Colorado
Posts: 7,440
Likes: 0
Received 0 Likes on 0 Posts
I had Way and his guys install a DDM CAI and 19mm rear-bar at AMVIV. Best service and great product. Get on the schedule.

I was scheduled for Saturday morning, when I arrived in early afternoon on Thursday, Way insisted I bring the R56 over to have the CAI installed early so I could enjoy it on some of the desert runs.

Wow, was I glad, a world of difference in my MCSa, very fun to listen too. A nice little power gain too.
 
  #15  
Old 04-13-2008, 01:48 PM
surreptitious
surreptitious is offline
2nd Gear
Join Date: Sep 2006
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Would it be possible to bring a couple or (several) sets of your WMW Brake Ducts (r53), http://www.waymotorworks.com/product...cat=286&page=1
I really would like see them in person, And would hope for a Special "Dragon" Cost, no tax (Hint, Hint), After seeing "gnatster " modded Aero bumper install, and can't wait to see his car in person, I want a set, Just thinking about it. Looking forward to seeing your goodies, Thanks
 
  #16  
Old 04-14-2008, 06:18 AM
hogtrader's Avatar
hogtrader
hogtrader is offline
2nd Gear
Join Date: May 2005
Location: Lake Placid, FL
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Time to figure what it will cost me

Hey Way,

It's time for you to tell me what part of my body you want for payment (arm, leg, lung, etc.).

I haven't heard from you for a coupl'a months and we need to finalize our install plans.

Get in touch when you get a chance.

Thanx,
hogtrader
 
  #17  
Old 04-14-2008, 08:04 AM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by surreptitious View Post
Would it be possible to bring a couple or (several) sets of your WMW Brake Ducts (r53), http://www.waymotorworks.com/product...cat=286&page=1
I really would like see them in person, And would hope for a Special "Dragon" Cost, no tax (Hint, Hint), After seeing "gnatster " modded Aero bumper install, and can't wait to see his car in person, I want a set, Just thinking about it. Looking forward to seeing your goodies, Thanks
Yes I'll be bringing a couple sets of Brake ducts. I also now offer them for the GP without the scoops for $225.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
  #18  
Old 04-21-2008, 01:45 PM
mikesMINI's Avatar
mikesMINI
mikesMINI is offline
2nd Gear
Join Date: Oct 2004
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Way, think you might have time to install my WMW swaybar links?
 
  #19  
Old 04-24-2008, 04:22 PM
arch-r's Avatar
arch-r
arch-r is offline
1st Gear
Join Date: Oct 2005
Location: Baton Rouge
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
sport track install

We talked earlier by phone re: sport track install on my 05 MCS. Just wanted you to know, I will be there on Wednesday around noon. After I check in I will deliver my MINI for you to do your thing. See you there.
 
  #20  
Old 04-24-2008, 06:22 PM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
Mike, We can install your endlinks, but can't dial them in exact without level ground.

Sport link install on Wed, is no problem
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
  #21  
Old 04-27-2008, 06:13 AM
mikesMINI's Avatar
mikesMINI
mikesMINI is offline
2nd Gear
Join Date: Oct 2004
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
We will be getting in on Wednesday afternoon. I will check with you for a time. Now if I can just get the sport link installed on Wanda's car the world would be right again.
 
  #22  
Old 04-29-2008, 08:28 PM
[email protected] MOTOR WORKS
MINIGURU@WAY MOTOR WORKS is offline
Vendor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Atlanta/Indianapolis
Posts: 1,152
Likes: 0
Received 0 Likes on 0 Posts
We're hear and ready. See everyone tomorrow.
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
  #23  
Old 04-29-2008, 10:48 PM
CRasH180's Avatar
CRasH180
CRasH180 is offline
1st Gear
Join Date: Feb 2007
Location: Nashville, TN
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
See you there. I don't think I am going to have any money available for any upgrades this year. I bought the Carbotech Bobcat brakes and while working on my car a few days ago seem to have lost the key to my wheel lock. Wish there was an easier way to get the wheel lock off. Then again, it would not be a wheel lock if you could easily unlock it.
 
  #24  
Old 05-01-2008, 03:46 AM
blalor
blalor is offline
6th Gear
Join Date: Jan 2005
Location: RVA
Posts: 1,231
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CRasH180 View Post
See you there. I don't think I am going to have any money available for any upgrades this year. I bought the Carbotech Bobcat brakes and while working on my car a few days ago seem to have lost the key to my wheel lock. Wish there was an easier way to get the wheel lock off. Then again, it would not be a wheel lock if you could easily unlock it.
Check the tool kit in the boot next to the battery. My car has a spare wheel lock key in there that I didn't know about until I had to dig out the tow hook to get pulled out of a snow bank. I don't know if the dealer put it there when I took delivery or if every car comes with one...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
W0TM8
General MINI Talk
11
08-16-2015 12:32 AM
PelicanParts.com
Vendor Announcements
0
08-14-2015 11:07 AM
Emnotek
Vendor Announcements
0
08-13-2015 05:47 PM
minipopkart
R50/R53 :: Hatch Talk (2002-2006)
2
08-13-2015 05:22 AM
WayMotorWorks
Vendor Announcements
0
08-04-2015 01:47 PM


Thread Tools
Search this Thread
Quick Reply: Way Motor Works at MOTD


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: