Tires, Wheels, & Brakes Discussion about wheels, tires, and brakes for the new MINI.

Front Brake Pads and rotors help

Thread Tools
 
Search this Thread
 
  #1  
Old 03-21-2018, 05:40 AM
Heroofsomething's Avatar
Heroofsomething
Heroofsomething is offline
1st Gear
Thread Starter
Join Date: Mar 2018
Posts: 27
Received 2 Likes on 2 Posts
Front Brake Pads and rotors help

So, I have a 2009 Base Mini Cooper Hatchback(R56 NON-S)
I want to replace the brake pads and rotors and stumbled upon a few errors. My model year is 2009 but my production year is 11-2008 and I was on eBay, I looked it up as a 2009 Mini Cooper but when I check for compatibility, it says in the notes that it’s from September 09 to 2010 and it confuses me because now I’m not sure if it’s my mini. I went to realoem and put my mini, along with the production date and it has the part number that is also on the eBay brake pads but it’s as a interchange part number, not the manufactor part number. It’s all so confusing. I wanted to get some “better than OEM” brake rotors and pads but I can’t seem to find them for my mini. If anyone can help, I would greatly appreciate it. I replaced my rear brake pads and rotors with some autozone and O’Reillys parts but I want something at least oem or better like Brembo brakes and redstuff pads but I’m just a daily commuter not looking for super performance just good brakes lmao thanks again if anyone even made it this far
also it’s annoying because everything I look for is S or JCW and I have the most base mini hah
 
  #2  
Old 03-21-2018, 05:54 AM
njaremka's Avatar
njaremka
njaremka is online now
Alliance Member
Join Date: Jul 2016
Location: WNY
Posts: 6,119
Received 1,715 Likes on 1,382 Posts
That's why I don't buy items like brake parts on Ebay.

Go to one of the forum sponsors, and they can help you get the correct parts.
 
  #3  
Old 03-21-2018, 06:10 AM
Heroofsomething's Avatar
Heroofsomething
Heroofsomething is offline
1st Gear
Thread Starter
Join Date: Mar 2018
Posts: 27
Received 2 Likes on 2 Posts
Originally Posted by njaremka
That's why I don't buy items like brake parts on Ebay.

Go to one of the forum sponsors, and they can help you get the correct parts.

where do i find that again? Sorry, I’m fairly new to this site. I made an account just to ask the question. Thanks!
 
  #4  
Old 03-21-2018, 06:12 AM
njaremka's Avatar
njaremka
njaremka is online now
Alliance Member
Join Date: Jul 2016
Location: WNY
Posts: 6,119
Received 1,715 Likes on 1,382 Posts
  #5  
Old 03-21-2018, 06:22 AM
Heroofsomething's Avatar
Heroofsomething
Heroofsomething is offline
1st Gear
Thread Starter
Join Date: Mar 2018
Posts: 27
Received 2 Likes on 2 Posts
Originally Posted by njaremka
yeah, that shows me the vendors but they only have a link to their thread posts and it only shows half the screen. Unfortunately I’m on my phone so maybe that’s why.
 
  #6  
Old 03-21-2018, 06:51 AM
WayMotorWorks's Avatar
WayMotorWorks
WayMotorWorks is offline
Vendor
iTrader: (10)
Join Date: Jul 2006
Location: Atlanta, GA
Posts: 10,557
Received 757 Likes on 618 Posts
Here are the redstuff that we use in our shop for your MINI
https://www.waymotorworks.com/ebc-re...per-non-s.html

And our WMW rotors that will last and not rust.
https://www.waymotorworks.com/wmw-br...per-non-s.html

This is the same combo we do when we do a Non S brake job on a car in for service.
 
__________________


HOTCHKIS | DDM | CRAVEN | AKRAPOVIC | NM ENGINEERING | MEGAN | FORGE | IE | OS GIKEN | POWERFLEX and more
The following users liked this post:
Heroofsomething (03-23-2018)
  #7  
Old 03-21-2018, 06:53 AM
Heroofsomething's Avatar
Heroofsomething
Heroofsomething is offline
1st Gear
Thread Starter
Join Date: Mar 2018
Posts: 27
Received 2 Likes on 2 Posts
Originally Posted by WayMotorWorks
Here are the redstuff that we use in our shop for your MINI
https://www.waymotorworks.com/ebc-re...per-non-s.html

And our WMW rotors that will last and not rust.
https://www.waymotorworks.com/wmw-br...per-non-s.html

This is the same combo we do when we do a Non S brake job on a car in for service.
thank you thank you! Yes these are what I was looking for! Although I thought slotted or drilled rotors were better? Either way these look good, I’ll be buying these as soon as I can! I think I’ll only need the sensor and the kit to finish this up.
 
  #8  
Old 03-21-2018, 08:13 AM
WayMotorWorks's Avatar
WayMotorWorks
WayMotorWorks is offline
Vendor
iTrader: (10)
Join Date: Jul 2006
Location: Atlanta, GA
Posts: 10,557
Received 757 Likes on 618 Posts
Originally Posted by Heroofsomething


thank you thank you! Yes these are what I was looking for! Although I thought slotted or drilled rotors were better? Either way these look good, I’ll be buying these as soon as I can! I think I’ll only need the sensor and the kit to finish this up.
Slotted and drilled are really for the look anymore. With these pads we have actually found they last longer and are quieter on plain face rotors. This is what I run on my personal car.
 
__________________


HOTCHKIS | DDM | CRAVEN | AKRAPOVIC | NM ENGINEERING | MEGAN | FORGE | IE | OS GIKEN | POWERFLEX and more
The following users liked this post:
Heroofsomething (03-21-2018)
  #9  
Old 03-23-2018, 02:09 PM
Pgh Performance Parts's Avatar
Pgh Performance Parts
Pgh Performance Parts is offline
Former Vendor
Join Date: Jan 2018
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
We at Pittsburgh Performance Parts can help you out. Our price for the front Redstuff pads is $86.50 and the rear set is $93.99.. We can also get you a pair of front rotors for $68.99. For some reason, EBC does not make the rear rotors for the Gen 2 cars. We are also giving an additional 10% off your first order until March 31st. We also give free shipping on orders of $99.00 or more.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lowb35
Tires, Wheels, & Brakes
4
05-07-2007 07:05 AM
msjulie33
All other MINI parts and items for Sale (archive)
4
04-06-2007 08:22 AM
weiyu99
Detailing 101
10
04-06-2005 06:45 AM
jblow
Tires, Wheels, & Brakes
2
04-05-2004 12:40 PM
OutMotoring
Tires, Wheels, & Brakes
8
04-24-2003 05:52 PM



Quick Reply: Front Brake Pads and rotors help



All times are GMT -7. The time now is 05:49 AM.