R52 R52 Damaged Sliding Mechanism
#1
R52 Damaged Sliding Mechanism
Good evening.
The plastic part circled in the image below is damaged on my roof mechanism - it’s basically snapped off at one end which means that when closing the roof it slides off the metal which is meant to hold it in place. Then once it’s off the roof sags a little on that side and the metal rubs against the metal in the rail.
I have experimented with various epoxies but it comes apart again after a few days.
Both of the plastic parts are removable so I wondered whether anyone has managed to source them as individual parts? I only need the one circled. My cable and mechanism (apart from this plastic) works fine so don’t want to replace it unless I really have to.
Any ideas?
Many thanks, Leon
The plastic part circled in the image below is damaged on my roof mechanism - it’s basically snapped off at one end which means that when closing the roof it slides off the metal which is meant to hold it in place. Then once it’s off the roof sags a little on that side and the metal rubs against the metal in the rail.
I have experimented with various epoxies but it comes apart again after a few days.
Both of the plastic parts are removable so I wondered whether anyone has managed to source them as individual parts? I only need the one circled. My cable and mechanism (apart from this plastic) works fine so don’t want to replace it unless I really have to.
Any ideas?
Many thanks, Leon
#2
#3
Those things wear down, mine was bad when (ended up i replaced the cable set which fixed the other issues), i have not seen that part on its own, I tried to find something that worked and it was hard to find something that would fit those dimensions and fit. I also tired JB weld and it broke off again. I guess you would have to fab it with epoxy.
https://www.northamericanmotoring.co...tible-top.html
https://www.northamericanmotoring.co...tible-top.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
NKBCayman
R52 :: Cabrio Talk (2005-2008)
1
06-10-2012 07:11 AM
Interior/Exterior Sliding roof/net-SUNROOF questions
doombuggy
Interior/Exterior
5
08-08-2005 07:59 AM
rsbell
R50/R53 :: Hatch Talk (2002-2006)
7
02-15-2005 12:56 PM