Hey guys, names Mike.
Im From upstate NY
Driving an 06 r53.




I have a few questions and no amount of forum surfing has helped.

Recently I plugged in an obd2 scanner trying to read live data to check out my IAT.
I've come to the realization that my car never gets 100% throttle. I only see 85-86% throttle input. I'm getting no check engine or EML light.
I've been looking for voltage specs
So I can test the pedal voltage to see if that's my issue.
I've been reading these forums for months and finally decided it's time to become a member
Megan euro street 2 coilovers<br/>Silicone radiator hoses, 82deg (c) thermostat, craven speed 15% pulley, manzo catback, polyurethane motor mount inserts, nyppd solid torque mount.

 

Welcome to NAM! Great looking car. Love the dark gray with black top. Mine is light gray with the same top. Sharp wheels, too! I'll check with our tech guy and see what he says! In the meantime, here's a handy maintenance guide:

http://new.minimania.com/MINI_Cooper...nance_Schedule

Drive Hard. Drive Safe. Keep Grinning.

 

Gimme those seats! Which part of ny

 

Poughkeepsie / highland area, about an hour n a half south of albany.

 

My car as far as i know is a mini cooper S<br/>ON THIS TAG second line down it says<br/>JCW GP kit test group...<br/>Does this mean i have a jcw car?

 

Looks like the tag has all of the models listed.

 

I just noticed that *facepalm*

Still kinda stumped on not being able to get 100% throttle input

 

The accelerator pedal uses two Hall sensors to detect position:

Hall sensor 1: 0.5 to 4.5 volts driver request

Hall sensor 2: 0.5 to 2.0 volts plausibility check.

Hope this helps!

Drive Hard. Drive Safe. Keep Grinning.