FS:: iPE Catless Downpipe
SOLD: iPE Catless Downpipe
Category: Drivetrain
Price: $400
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R55, R56, R57, R58, R59, R60
Location (Region): NorCal
Item Condition: Used
For sale is a great condition iPE catless downpipe. I bought it from a member here and used it on my 08 S for about a month, and then removed it to sell my car. Now I have a 2013 JCW and don't want to deal with the hassle of removing for CA emissions.
The tone with the DP was awesome, the car was definitely raspier in combination with the fJCW muffler. Slight power gains were noticeable but I don't have numbers, just my butt dyno. It has a flared out midsection as if it has a cat, but I looked through the tube and verified it does not.
$400 shipped, buyer adds goods/services fee or pays gift. I have a couple iTrader ratings here and have more feedback on eBay under the same username.
Sample pictures here:
https://www.northamericanmotoring.co...-groupbuy.html
PM me with any questions.


Last edited by 3lusive; Jul 7, 2016 at 04:32 PM.
I looked through the O2 sensor on the topside (closest to turbo) of the downpipe and shone a light into the opposite end (closest to exhaust). I could see there's nothing inside the tube, and the very light weight helps confirm it. When I bought it, I thought it had a hi-flow cat but turns out, there's no cat and I can definitely tell from the smell too.
Diameter?
Can't find information on their product page...would you be able to measure the turbo side and exhaust side diameter openings?
Trending Topics
It's 2.5 inches at the turbo side, and 3.0 inches at the exhaust side. It fits with the stock exhaust piping though. You can bolt it right up as a replacement with no modifications to make it fit. The 3 inch measurement is probably because of the flanged end that fits underneath the exhaust clamp.
sometimes a product link is helpful for reference.
Here is the landing page:
http://www.ipe-f1.com/index.php/en-G...56-r57-r58-r59
you will need to scroll down to find the part.
Here is the landing page:
http://www.ipe-f1.com/index.php/en-G...56-r57-r58-r59
you will need to scroll down to find the part.
Thread
Thread Starter
Forum
Replies
Last Post
Marcuslawrence52@gmail.co
JCW Garage
2
Apr 6, 2016 08:58 PM



$400 is a steal for a downpipe of this quality and exclusivity.
