Category: Suspension
Price: $0
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R56
Location (Region): Midwestern
Item Condition: Used

Trading in my 07 mini cooper S, here are the suspension, brake, and wheel parts

JCW “Challenge” replica wheels w/tires 80% tread remaining - $600 + shipping

JCW – Genuine John Cooper Works Polished Aluminum upper strutbar - $180 shipped - SOLD

1 set of (2) 10mm wheel spacers, 1 set of (2) 15mm wheel spacers (total of 4 spacers)and 1 set of extended lugs(8 lugs)-$110shipped-SOLD
http://altaperformance.com/i-14007096-hr-15mm-wheel-spacers-for-4-lug-minis.html

R56 "JCW" drilled/slotted front rotors (NEW) for the standard MINI Cooper S brake size (11 9/16" diameter), these are not for the JCW Big Brake Kit - $150 shipped - SOLD

Here is a picture from my gallery on my profile here on NAM, please check there for more photos.


I will post pictures as soon as I take the parts off this Saturday (2/22/14)

 

I am interested in the JCW strut brace and the wheel spacers. Please contact me at amirsuman@hotmail.com

 

What brand are the extended lugs? Are they the M14x1.5 kit from WMW? And I assume you have enough spacers and bolts for all four wheels, not just two? Thanks.

 

I updated the post, I have (2) 10mm spacers, (2) 15mm spacers, and (8) extended lugs that were for the 15mm spacers. Spacers are sold by the axle, so a kit only includes 2 spacers and 8 (or 10) lug nuts/bolts. The idea here is you have enough to do either the front or rear wheels, and you can either do the 10mm or 15mm depending on your wheel offset and how much you lowered your car. the 15mm spacers made my wheels rub in the rear going over bumps with my 17" Challenge wheels and 0.75" NM Engineering lowering springs. I purchased the 15mm with the lugs, and also bought a set of 2 additional 10mm spacers so I could use the spacers I wanted. If I swapped out wheels or raised my car, then I could use the other ones.

 

Do you have a pic of the replica wheels and tires ?

 

How many miles on the springs?

 

2 winters, 2 summers in Wisconsin. About 20k miles on the everything. Not sure if I am going to go through the hassle of swapping back to the stock springs yet. I will know when I get into it tomorrow.

 

pmed

 

I'm interested in the 15mm spacers and the bolts! Still available?

 

Interested in the Drilled Rotors. Can you PM me a couple photos? Brand?

-Z

 

updated with photos, still available unless noted as SOLD

 

I read NM springs, those for sale?

 

I decided not to remove them, not worth the hassle

 

Where are you located?

 

Hi, what size are the wheels? and what would shipping be to 02492?
Thanks!

 

Not sure what shipping will be, I would say in the $100 range. They are 17x7 ET42

 

Wheels are still available