Interior/Exterior carbon mirrors, carbon rear wing, carbon interior peices, ca
#1
i need some of this stuff for a project car for SEMA. does anyone kno where i can get these things, or watever? i kno where to get the hoodscoop, but not the rest.
for the interior, i want full replacement peices , non of that stick on stuff.
if anyone has any information, please.. do tell =D thanks guys
for the interior, i want full replacement peices , non of that stick on stuff.
if anyone has any information, please.. do tell =D thanks guys
#4
#5
I make carbon fiber parts for a few different automobiles and other industrial applications. If you have any trouble finding what you want send me an e-mail. I would be willing to do just about any custom part or just copy the existing interior pieces. I will be getting a Mini shortly and will be comming out with my own designs of interior and exterior carbon part before the SEMA show.
carbon7@bellsouth.net
carbon7@bellsouth.net
#6
I just ordered a CF intake air scoop from:
http://www.diamondracinggroup.com/ca...bon_fiber.html
They tell me they also have completed a CF hood and working on a rear deck lid. While I am not interested in either of those two items, they said they would also do the rear lift handle over the license plate for me. As soon as the intake scoop arrives I will let everyone know what I think.
http://www.diamondracinggroup.com/ca...bon_fiber.html
They tell me they also have completed a CF hood and working on a rear deck lid. While I am not interested in either of those two items, they said they would also do the rear lift handle over the license plate for me. As soon as the intake scoop arrives I will let everyone know what I think.
#7
Trending Topics
#9
I agree CooperSpeed. Most of, in fact all of the interior carbon fiber products I have seen are veneered applica's. While they maybe real carbon fiber it still looks hokie.
I have a complete extra set of dash components that I was thinking about sending out to have made into CF components, not the veneered stuff. It could get pretty pricey, if anyone is interested, let me know. I can probably have an estimate in about a week. I am guessing it will cost about 300 to 400 dollars each to produce a full set of masters and one complete finished set. After that the costs should come down considerablly to say around 150 to 175 each piece, but I am just guessing based on previous experiance. Let me know if any of you are interested.
I have a complete extra set of dash components that I was thinking about sending out to have made into CF components, not the veneered stuff. It could get pretty pricey, if anyone is interested, let me know. I can probably have an estimate in about a week. I am guessing it will cost about 300 to 400 dollars each to produce a full set of masters and one complete finished set. After that the costs should come down considerablly to say around 150 to 175 each piece, but I am just guessing based on previous experiance. Let me know if any of you are interested.
#10
Hank - keep me informed - I am very interested. You can also email me at caseyswenson@mac.NOSPAM.com (remove the NOSPAM part) if you like when you have more info.
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM
Powershift
MINIs & Minis for Sale
1
08-16-2015 05:14 PM
marendt428
MINI Parts for Sale
1
08-09-2015 06:54 PM