Interior/Exterior Can I put a rear seat in a Gen1 GP?!?!?!?!
#1
#2
Vendor
iTrader: (10)
It could be done but will take you a little time. The biggest issue is the mounting nuts normally welded in the body at the factory for the center rear seat belt buckles are not there. So you would have to weld them in, or cut out that section and weld in the part with the mounting nuts. You also may have to cut off the mounting brackets for the rear strut brace. Otherwise from what I remember the rest should bolt in.
I have a couple wrecks you could get all the parts you need from, we can even cut the section with the rear center seat belt mount out for you.
I have a couple wrecks you could get all the parts you need from, we can even cut the section with the rear center seat belt mount out for you.
#5
#6
Its allot of work and can be done, I know a couple GP2's that have done it, you would have to source the seats and the panels, and those mounts. Good luck.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#7
Here is a GP2 that did what you wanted. It was for sale last month.
https://www.northamericanmotoring.co...rear-seat.html
https://www.northamericanmotoring.co...rear-seat.html
Trending Topics
#8
Saw that pretty cool.
When the GP2 mule car was racing around before production , I poked my head in and it had the rear seats in alcantara package. The window were blacked out so you could not see it.
When the GP2 mule car was racing around before production , I poked my head in and it had the rear seats in alcantara package. The window were blacked out so you could not see it.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#9
RANT COMING!!!
Why do people buy the wrong car!!! Why not just buy a none GP, maybe a JCW. The JCW is basically the same car..without the alloy trailing arms and the intercooler.
GP's are so rare and hard to find, that drilling holes and taking the interior apart will only devalue the car substantially!!! PLEASE LEAVE THESE CARS AS OEM AS POSSIBLE.. Gen 1's are great cars to collect and enjoy. We don't need 1 less example when there is a comparable alternative.
Why do people buy the wrong car!!! Why not just buy a none GP, maybe a JCW. The JCW is basically the same car..without the alloy trailing arms and the intercooler.
GP's are so rare and hard to find, that drilling holes and taking the interior apart will only devalue the car substantially!!! PLEASE LEAVE THESE CARS AS OEM AS POSSIBLE.. Gen 1's are great cars to collect and enjoy. We don't need 1 less example when there is a comparable alternative.
#10
5th Gear
iTrader: (8)
Join Date: Dec 2005
Location: Hesperia, Ca.
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
It's not blasphemy, this is how I was able to get my rear GP interior. Since I was able to put a GP rear interior into our 02, putting rear seats in a GP wouldn't really be a problem. You would just need to get all the parts to do it and it is completely reversible. If your anywhere near SoCal, I have all the parts you need.
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM