Interior/Exterior '13 dash in a '12

Reply Subscribe

Thread Tools

Search this Thread

#226

10-15-2013, 12:02 PM

ECSTuning

Platinum Sponsor

Join Date: Jan 2013

Location: Wadsworth, Ohio

Posts: 34,808

Likes: 5,322

Received 1,966 Likes on 1,766 Posts

None of the pieces are available by themselves yet and it has yet to be determined if they can fit a dash without the trim pieces previously as they look to have a snap in on the back. With modifications they might work.

The whole dash ( black ) which looks to include the piano black pieces is available. But that's it for right now.

#1 with Piano Black trim.

http://www.ecstuning.com/Search/SiteSearch/51459811341/

Thanks

__________________

Reply Like

#227

10-15-2013, 01:24 PM

MCap

Neutral

Join Date: Oct 2013

Posts: 5

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by ECSTuning

#1 with Piano Black trim.

http://www.ecstuning.com/Search/SiteSearch/51459811341/

Thanks

All clear, thanks.
I hope that the 3 trim alone could be fixed to the dashboard with some kind of glue, once available as a stand alone part.

Reply Like

#228

11-01-2013, 07:30 AM

ECSTuning

Platinum Sponsor

Join Date: Jan 2013

Location: Wadsworth, Ohio

Posts: 34,808

Likes: 5,322

Received 1,966 Likes on 1,766 Posts

Just an update:

Looks like the rear cup holder are available , but have to come from overseas.

Diagram # are by the parts to help.

#5 Cup Holder Lower Section w/ front center armrest Part# 51169813055

http://www.ecstuning.com/Search/SiteSearch/51169813055/

OR

#5 Cup Holder Lower Section w/o front center armrest Part # 51169812555

http://www.ecstuning.com/Search/SiteSearch/51169812555/

Then you will need the rest.

#8 Mount For Rear Cup Holder Part #51169812554

http://www.ecstuning.com/Search/SiteSearch/51169812554/

&

#7 Rear Cup Holder Upper Section Part # 51169812556

http://www.ecstuning.com/Search/SiteSearch/51169812556/

&

#6 x 2 Cup Holder Insert Rubber - Priced Each # 51169812557

http://www.ecstuning.com/Search/SiteSearch/51169812557 x 2

&

#10 x 2 Rubber Insert For Cup Holder - Priced Each Part # 51169811184

http://www.ecstuning.com/Search/SiteSearch/51169811184/

&

#9 Cup Holder Angle Bracket Part # 51169812558

http://www.ecstuning.com/Search/SiteSearch/51169812558/

------------------------

Hardware for mounting :

#12 Fillister head self-tapp.screw x 5 Part # 07147136006

http://www.ecstuning.com/Search/SiteSearch/07147136006/ES2675165/

&

#14 Self-locking collar nut x 2 part # 07119905374

http://www.ecstuning.com/Search/SiteSearch/07119905374/ES2676500/

&

#13 C-CLIP NUT x 5 part # 07146988451

http://www.ecstuning.com/Search/SiteSearch/07146988451/ES2675288/

Thanks and hope that helps people out.

Looks like fellow CM member just did the retrofit.

Thanks

Quote:

Originally Posted by ECSTuning

Piano black / Black - Left Part number 51459810003

http://www.ecstuning.com/Search/SiteSearch/51459810003/

&

Piano black / Black - Right Part number 51459810004

http://www.ecstuning.com/Search/SiteSearch/51459810004/

They are coming from overseas, so they will take some time, but are available now.

#8 in the diagram below:

For the front cup holder I believe you are talking about #6 and #7 post 11/2012 vs. 4 and 5 pre 11/2012 which MINI has superseded the old part to #6 and #7. So it look like the old part number are NLA.

Center Console Trim Cover - Front Part # 51169811185 no Nav short version

http://www.ecstuning.com/Search/SiteSearch/51169811185/

&

Center Console Trim Cover - Front Part # 51169811186 Nav - Longer version

http://www.ecstuning.com/Search/SiteSearch/51169811186/

On the rear cup holders. Nothing available yet, but stay tuned these might come in the future. Of course this is for no center rear rail.