Need help with coding
#1
Need help with coding
Looking for a way to bimmercode the rear fog lights on my 2014 Mini Cooper S f56 to work with my brake lights. I already have the app and the bluetooth OBD connector. The advance coding have too many options and I do not know the one need it for what I’m trying to accomplish. Can someone help me?
#3
you cannot "code" the rear fog lights to work with your brake lights.....you will have to remove the power wire to each fog light and run a wire from the each brake light to the corresponding rear fog light to light them up when you step on the brake.
The stock wiring for the brake and fog lights are on completely separate circuits
Bryan
(Looking at the post above mine...says it can be done....but logically it should not work because of the separate circuits involved......)
The stock wiring for the brake and fog lights are on completely separate circuits
Bryan
(Looking at the post above mine...says it can be done....but logically it should not work because of the separate circuits involved......)
The following users liked this post:
Desi (10-27-2019)
#4
Rear Fogs as Brake Lights: (This hasn't been checked on a car w/rear fogs working)
Have to go into expert mode:
BDC_BODY
3065 LceLampMapping4, ED
Funktionen
MAPPING_BREMSL_2_L_OUTPUT
Switch to this
nsl_l (this is the rear fog light choice)
You need to do this for right and left. Above is for left,
For RHS just change the l to r
MAPPING_BREMSL_2_R_OUTPUT
nsl_r__________________
I did this on my 19' F56 and it worked on the first shot. You don't need to activate the rear fogs, just change the coding listed above.
Have to go into expert mode:
BDC_BODY
3065 LceLampMapping4, ED
Funktionen
MAPPING_BREMSL_2_L_OUTPUT
Switch to this
nsl_l (this is the rear fog light choice)
You need to do this for right and left. Above is for left,
For RHS just change the l to r
MAPPING_BREMSL_2_R_OUTPUT
nsl_r__________________
I did this on my 19' F56 and it worked on the first shot. You don't need to activate the rear fogs, just change the coding listed above.
The following users liked this post:
Desi (10-27-2019)
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
MarioKart
Electrical
8
12-05-2006 07:18 PM