When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So on the 2019 F56's are the hood/tailgate emblems stick on or stick/bolt on?
I was going to black them out, but now I'm thinking of removing them completely. Just don't want to remove them and find out there's two holes underneath them.
They have little alignment pins on the back dependant on what model you have. On the front, i think no pins, on the back there are pins. To remove the old ones a hair dryer (heat it up) and floss works great.
we just landed some of the new ones for the F56 and others:
I actually ordered the black LCI badges a few days ago for my '15 and they should be here Saturday. Does anyone have the part number or a listing for the boot handle? I've been told due to being different the LCI badge won't fit on the pre-LCI boot handle but I can't seem to find it.
It is hard to tell. So my SO has a 2019 convertible and I have a 2015 Hardtop, and I actually just measured them. They are exactly the same length and height. The only concern there is for me is that the new boot handle is flat, while the pre-lci has a recessed around the badges. As a note, I have already replaced the front, and it had two position holes in it. It will have to be filled if you want to remove it.
El-Grunto, my expectation is that you will not need the updated boot handle, as I am certain it will fit correctly. With that being said, let me know how the rear goes. As I am planning to pick it up soon.
They are stick with pins, front and back. I put LCI ones on my '15. The rear latch on the LCI does not have the indent. Outmotoring has black cover kit that you stick on over logos. They also give you a choice of color surrounds (vinyl) for the MINI circle.
So it works and sets down and follows the curve on the trunk grip handle. The badge has a curve also. Its sets a little higher in the stock location of the old Chrome badge, But still aligned in that indent. Sets flat to it and position is a tad higher, maybe a millimeter or so.
Badges are the same size, i think the alignment pins on the back just set more towards the middle on black (post LCI version.. If you are really picky on alignment you could just notch or remove the back pins and realign it.
They are stick with pins, front and back. I put LCI ones on my '15. The rear latch on the LCI does not have the indent. Outmotoring has black cover kit that you stick on over logos. They also give you a choice of color surrounds (vinyl) for the MINI circle.
Yup. Mine just came in the mail today. Both the LCI front and the back are adhesive with alignment pins.
The part number for the rear trunk lid grip in black with reversing camera is: 51137489756. I bought the 2 black emblems and the grip and fitted them to my 2016 JCW. I think it looks great. The emblems have aligning pins and adhesive.
The part number for the rear trunk lid grip in black with reversing camera is: 51137489756. I bought the 2 black emblems and the grip and fitted them to my 2016 JCW. I think it looks great. The emblems have aligning pins and adhesive.
That’s a great looking JCW.....except for the red roof & mirrors it’s just like mine. I like he black trim pieces & the rear deflector with deflectors as well as the front deflectors. I wouldn’t change a thing!
The part number for the rear trunk lid grip in black with reversing camera is: 51137489756. I bought the 2 black emblems and the grip and fitted them to my 2016 JCW. I think it looks great. The emblems have aligning pins and adhesive.
Just curious why you bought the new trunk lid grip? Prefer the flat look versus the notched one that came on our pre-LCI cars?
So it works and sets down and follows the curve on the trunk grip handle. The badge has a curve also. Its sets a little higher in the stock location of the old Chrome badge, But still aligned in that indent. Sets flat to it and position is a tad higher, maybe a millimeter or so.
Badges are the same size, i think the alignment pins on the back just set more towards the middle on black (post LCI version.. If you are really picky on alignment you could just notch or remove the back pins and realign it.
So then the line on the website about possibly needing to get the LCI smooth-faced trunk grip isn't accurate since you verified the badges fit the pre-LCI recessed trunk grip?
So then the line on the website about possibly needing to get the LCI smooth-faced trunk grip isn't accurate since you verified the badges fit the pre-LCI recessed trunk grip?
It'll fit just fine on the pre-LCI boot handle as it did on mine. It's not perfectly centered just being a hair higher than the old badge but I doubt anyone will ever really notice.
So then the line on the website about possibly needing to get the LCI smooth-faced trunk grip isn't accurate since you verified the badges fit the pre-LCI recessed trunk grip?
Its just for people that are purist and want the OEM look for the year. Hence what el grunto posted.
UPDATE: Back in stock again and we added more emblems for the clubman, countryman , and the NEW " Cooper S" emblem that can also be used on the Cooper, just dont apply the "S"
MINI Cooper S Model Lettering - Piano Black 51142465245
They come with double side 3m tape already on the new ones from MINI. When you install new ones make sure the surface is clean and no wax in the spot you install. I use a little windex and mare sure if you have an old emblem on there before that the gummy left over 3m double sided tape residue is gone, WD40 helps and then clean again with windex.
We now have MINI Floating Logo (like Rolls Royce) Center Caps. These are for the F54-F60 Cars that take the normal center cap with exposed lugs. We even tested it to fit on Team Dynamics wheels also, they fit a bit loose. Update ** You might need to add a couple wounds of tape for them to hold into place.
We had a video on IG of the spinning of the caps, but IG is down and not working right now.
We now have MINI Floating Logo (like Rolls Royce) Center Caps. These are for the F54-F60 Cars that take the normal center cap with exposed lugs. We even tested it to fit on Team Dynamics wheels also.
We had a video on IG of the spinning of the caps, but IG is down and not working right now.
