When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Problem solve. I made two adapter cables to retrofit UJ Tail Lights. It's so easy to do.
After coding, no error message pop up.
Hi maaii,
I’d like to install the new Union Jack tail light to my 2018 F54. How can get one of your cable adapter? Can you help also with the instructions. Thanks
Adem
Hi Maaii, I would like to retrofit my 2016 clubman into a pick up and bought union jack taillights. I need the adapter wires you make and coding instruction. Do you still have those? Please help. Thank you so much!!
Hi Maaii, I would like to retrofit my 2016 clubman into a pick up and bought union jack taillights. I need the adapter wires you make and coding instruction. Do you still have those? Please help. Thank you so much!!
Hello to the entire Mini F54 community
My name is Philippe.
Thanks to this topic and @maaii ’s example, I also embarked on the adventure of retrofitting tail lights. The method is indeed very simple and in addition it is reversible. Switching the pins in the pillar was the most difficult part, and still it is enough to identify the numbers. We can't go wrong. And the pins can be taken out without forcing with the right technique. The part of the cable puggling as Maaii proposes is the easiest part of the job.
However, I had to forget something with bimmercode because the brake lights do not take the full width and simply the shape of the fog lights of the LCI versions.
Could someone please help me by sending me the exact Bimmercode instructions to correct this? That would be great🙂
Best regards✌️
Last edited by FRPhilippe; 02-12-2024 at 01:15 AM.
Good morning to all. Hi maii. I am trying to figure out how to retrofit the English tailight. Reading the official bmw guide, it is mentioned to run two cables from the bcm control unit to the rear headlights. With maii's adapters is this step necessary?
With my adapter cables and codes, no need to add two cables from bdc to rear taillight.
Originally Posted by Clubman76
Good morning to all. Hi maii. I am trying to figure out how to retrofit the English tailight. Reading the official bmw guide, it is mentioned to run two cables from the bcm control unit to the rear headlights. With maii's adapters is this step necessary?
11-27-2022, 02:47 PM
