Electrical FRM2 and diagnostic question
Thread Starter
|
Neutral
Joined: May 2022
Posts: 1
Likes: 0
FRM2 and diagnostic question
Fighting with FRM and lighting issue. Random lights are out, interior and exterior.
First question is the difference between FRM2_R56.C08, FRM2_R56.C09 and FRM2_R56.C0B?
Next question is, can I test individual light circuits with one of the programs. In INPA I was able to turn on/off individual lights systems but not individual lights. I.E., turn on low beams, but not able to turn them on individually.
I'm trying to determine if the lights don't work due to FRM issue, or a break in the wiring somewhere.
Thank you,
Herbert
First question is the difference between FRM2_R56.C08, FRM2_R56.C09 and FRM2_R56.C0B?
Next question is, can I test individual light circuits with one of the programs. In INPA I was able to turn on/off individual lights systems but not individual lights. I.E., turn on low beams, but not able to turn them on individually.
I'm trying to determine if the lights don't work due to FRM issue, or a break in the wiring somewhere.
Thank you,
Herbert
Thread
Thread Starter
Forum
Replies
Last Post
DoubleNick
General MINI Talk
3
Jun 18, 2011 06:30 PM