Drivetrain M7 Air Gain System... Sneak Peek
M7 Air Gain System... Sneak Peek
Hi everyone....
It's Christmas eve and I figure a sneek peek of the "Air Gain System" would
cheer most of you up.
A little explanation of what's coming and what to expect......
The M7 AGS consist of a multitude of parts everything from T-bolt hose clamps
vaccume connectors and a new wiring harness with custom plugs.
The system consist of 16 seperate parts, all engineerd to make the install
as intuitive and easy as possible.
So what can you expect performance wise from the AGS, as it outflows any
system currently on the market by a margin. The difference is amazing
as the engine will rev faster and more freely.
We will have all the Dyno charts and flow tests available very soon....
Image one: M7 Air Gain System
Image two: our patented AGS tube
Image three: Mini stock SC tube
Merry Christmas
peter
Team M7
562-712-3270


It's Christmas eve and I figure a sneek peek of the "Air Gain System" would
cheer most of you up.
A little explanation of what's coming and what to expect......
The M7 AGS consist of a multitude of parts everything from T-bolt hose clamps
vaccume connectors and a new wiring harness with custom plugs.
The system consist of 16 seperate parts, all engineerd to make the install
as intuitive and easy as possible.
So what can you expect performance wise from the AGS, as it outflows any
system currently on the market by a margin. The difference is amazing
as the engine will rev faster and more freely.
We will have all the Dyno charts and flow tests available very soon....

Image one: M7 Air Gain System
Image two: our patented AGS tube
Image three: Mini stock SC tube
Merry Christmas
peter
Team M7
562-712-3270


Last edited by M7; Apr 9, 2005 at 12:39 PM.
Hi Peter and Merry Christmas. Can you explain what you mean by "Air Gain"? Do you mean an additional way to get more air into the system or a replacement of the current intake system?
edit: I see in picture 3 the comparison to picture 2. It looks like a replacement. I've heard in the past that people have said this was the "weak link in the chain" as far as air-flow is concerned. Do you think it will be for just extremely modded MCS's or as something even an un-modded (or slightly modded) MCS might be able to take advantage of?
edit: I see in picture 3 the comparison to picture 2. It looks like a replacement. I've heard in the past that people have said this was the "weak link in the chain" as far as air-flow is concerned. Do you think it will be for just extremely modded MCS's or as something even an un-modded (or slightly modded) MCS might be able to take advantage of?
im in long beach for the holidays can i come see the toy shop and all your neat idea. santa needs to put something under the mini tree. you can email me and let me know. j.b.cuny@worldnet.att.net
Trending Topics
Back from presents and high caloric foods (and a nap)..... :smile:
Regarding the flow capabilities we will have tons of data to share, that will
include all the competing systems on the markets (HAI included).
The install looks far worse then it is, as always our products come with a monstrous instructions manual and an online video instruction with blow by blow
how too's......
Regarding the "AIR Gain System" name all I can say, is that I liked how it sounds
and it does (gain) more air then any other system.
I attached another view of the SC tube Vs. the M7 AGS. The design is 4" shorter then the stock tube, situating the TB 4" further down in to the air stream. If you could look in thru the TB at full opening you would literally
see the super charger screws right there.
Regarding the flow capabilities we will have tons of data to share, that will
include all the competing systems on the markets (HAI included).
The install looks far worse then it is, as always our products come with a monstrous instructions manual and an online video instruction with blow by blow
how too's......
Regarding the "AIR Gain System" name all I can say, is that I liked how it sounds
and it does (gain) more air then any other system.
I attached another view of the SC tube Vs. the M7 AGS. The design is 4" shorter then the stock tube, situating the TB 4" further down in to the air stream. If you could look in thru the TB at full opening you would literally
see the super charger screws right there.
Last edited by M7; Dec 25, 2004 at 09:09 PM.
I can vouche that opening up that runner makes a huge different. sfjames2 has a non-pullied MCS and it is fast. A few of us went blazing through the broadway tunnel in San Francisco... him and his wife were in his MCS (intake & exhaust + runner bored out) while I had 2 other people in my MCS (intake, exhaust, pulley, unichip) and I wasnt closing in on him nearly as fast as I should have been.
drumanbass, I AM FIRST IN LINE... SIT BACK
drumanbass, I AM FIRST IN LINE... SIT BACK
Last edited by Mark; Dec 25, 2004 at 06:10 PM. Reason: Removed profanity from post
Originally Posted by JCampos
I can vouche that opening up that runner makes a huge different. sfjames2 has a non-pullied MCS and it is fast. A few of us went blazing through the broadway tunnel in San Francisco... him and his wife were in his MCS (intake & exhaust + runner bored out) while I had 2 other people in my MCS (intake, exhaust, pulley, unichip) and I wasnt closing in on him nearly as fast as I should have been.
drumanbass, I AM FIRST IN LINE... SIT BACK
drumanbass, I AM FIRST IN LINE... SIT BACK

what kinda car did you drive before a Mini Cooper S to think they are fast?
seriously?
Last edited by Mark; Dec 25, 2004 at 06:10 PM. Reason: Removed profanity from post
Originally Posted by Kendel72
Projected release date & estimated price?
Very,very soon.....
Two options will be available:
1. M7 Air Gain System $299.00
2. M7 AGS Pro w/62mm TB $599.00
3. Some other options wiill be available in the 1st quarter of 05.
peter
Team M7
562-712-3270
www.m7tuning.com
Originally Posted by drdrumanbass
I really am first in line.... Dr Horvath and Randy have reasured me that they will take care of the family first.
TMMZ
TMMZ
I'm just feel fortunate to be kinda adopted
Scraps are good too...beggars can't be choosers
Originally Posted by JCampos
Alright, but Im up there with ya
Im goin for the TB also 

But that was for a good cause...feeding Randy's family
Merrry Christmas Randy
You " early birds " have nothing to worry about as the first production run will be in the neighborhood of 100 pieces 
Randy
www.m7tuning.com

Randy
www.m7tuning.com





