hate to start another thred but i cudent find this in the DIY section. im swapping injectors, fuel rail is out, clips are off. is there a trick for pulling the injectors out of the IM, they seeem real stuck. thanks

 

Leave injectors attached to the rail, remove the whole unit.

The Injector O-rings get brick hard and brittle making them quite snug.

Be sure to use a shop vac in that area before removing them to keep sand and other debris from going in.

 

number 2 injector tore in half leacing the nosr stuck into the manifold. now i need to somehow remove the broken half. will my mini delaership have injector clips and valve cover bolts?