Your use of similies is awesome! lol

Please post up your graphs very soon.

Which kit did you use ? Think you could do a mini write up about your install w/ the dyno graphs?

Thanks !

 

I will try to do a writeup when the time comes.

As for the kit it is a "stage 2 trunk mount kit" from http://www.alcoholinjectionsystems.com/

Just be fore warned the O-rings that come on the nozzles and in the checkvalve are TOTAL JUNK, replace them as soon as you open the box!
For the checkvalve I went with one size smaller and its held up pretty well so far, but the one that comes in it is too big and will stretch and blow off causing a leaky valve. Which makes for LOTS of lower RPM driving isues, that I will explain later.

 

Well hurry up !! lol

Thanks for the link to the kit. I have a buddy who will sell me his barely used Devils Own Stg 2.5 w/ a 3qt tank. I think i will be picking that up, but wanted to know yours just to compare.

I am looking forward to any information you put out there. Thanks !

 

If you want to learn a lot about meth injection this site is short on flash but LONG on info . He helped me put my system together as well as Dman's and he really knows his stuff.

Randy
m7 Tuning

http://mysite.verizon.net/res11pgkr/