Common aftermarket stud length estimate
Thread Starter
|
3rd Gear
Joined: Jul 2018
Posts: 190
Likes: 26
Common aftermarket stud length estimate
Despite telling the tech not to power torque my wheels they had to blowtorched and unceased the overtightened nuts. They are paying for the replacement studs/nuts set. The seller is out of the country vacationing. Trying to find replacement studs myself wondering from your experience how to estimate the length of the studs that was installed on the hub already, I.e
Typical length of the stud below the hub surface? I don't want to take one off and re install with blue loctite afraid it would impact the integrity of the stud. The car is for street use only without tracking or abuse. TIA
Typical length of the stud below the hub surface? I don't want to take one off and re install with blue loctite afraid it would impact the integrity of the stud. The car is for street use only without tracking or abuse. TIA
Last edited by Gelmobile; Feb 20, 2026 at 11:38 AM.
Alliance Member
Joined: Jul 2016
Posts: 7,534
Likes: 2,503
From: WNY
Thread
Thread Starter
Forum
Replies
Last Post
tragedybysyntax
Tires, Wheels, & Brakes
4
Jun 4, 2012 06:34 PM
RedAndBlackMiniS
Tires, Wheels, & Brakes
4
May 25, 2012 05:05 AM