Help finding aftermarket lug bolts
#1
#3
If you do the stud conversion...get quality studs, and carfuly measure the length you need....it will vary based upon your choice of wheels.
I ran studs for a bit...they can be removed when you want with a pair of jam nuts...they usually go on with an allen wrench.
It will give you many more choices....
I removed mine when I was able to find lug bolts with the correct "tuner" head size foe one of sets of rims....
I ran studs for a bit...they can be removed when you want with a pair of jam nuts...they usually go on with an allen wrench.
It will give you many more choices....
I removed mine when I was able to find lug bolts with the correct "tuner" head size foe one of sets of rims....
#4
Since the bolt diameter on many mini's are nonstamdard, depending upon production date, you choices may still be somewhat limited....
Talk to a vendor...a few the stud kits in both sizes, and will get you the correct one.
Since the torqe to mount wheels are kinda high for some of the fastner ends you mentioned, it may not be possible though...steel cannot be colored like you mentioned....can be laquered....
Talk to a vendor...a few the stud kits in both sizes, and will get you the correct one.
Since the torqe to mount wheels are kinda high for some of the fastner ends you mentioned, it may not be possible though...steel cannot be colored like you mentioned....can be laquered....
#5
Thread
Thread Starter
Forum
Replies
Last Post
ClayTaylorNC
R50/R53 :: Hatch Talk (2002-2006)
6
08-10-2015 09:19 PM