Suspension Springs, struts, coilovers, sway-bars, camber plates, and all other modifications to suspension components for Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Suspension clunking noise coming from rear

Thread Tools
 
Search this Thread
 
Old Jun 4, 2012 | 06:56 PM
  #1  
minime331's Avatar
minime331
Thread Starter
|
2nd Gear
iTrader: (1)
Joined: Nov 2011
Posts: 143
Likes: 0
clunking noise coming from rear

hi so i just installed some tsw springs, koni yellows and h-sport RCA (rear control arms). my problem i am having is if i go over a bump of any sort big or small as soon as my rear tires go over i hear a clunking noise coming from what i think is the rear shocks, spring (sounds like they are hitting something). it sound like its coming from inside the wheel well. i can't figure out whats going on.

any help is greatly appreciated
 

Last edited by minime331; Jun 4, 2012 at 09:23 PM.
Reply
Old Jun 4, 2012 | 07:42 PM
  #2  
blue2turbo's Avatar
blue2turbo
4th Gear
iTrader: (8)
Joined: Aug 2010
Posts: 531
Likes: 0
From: Austin, TX
Double check the torque on all of the bolts?

Sounds like it could be either the springs aren't seated right or the top nut on the upper mount isn't torqued all the way down. Did you install after market endlinks?
 
Reply
Old Jun 4, 2012 | 08:52 PM
  #3  
minime331's Avatar
minime331
Thread Starter
|
2nd Gear
iTrader: (1)
Joined: Nov 2011
Posts: 143
Likes: 0
no end links i went back to re tighten the bolts with the in-pack wrench
 
Reply
Old Jun 5, 2012 | 06:17 AM
  #4  
blue2turbo's Avatar
blue2turbo
4th Gear
iTrader: (8)
Joined: Aug 2010
Posts: 531
Likes: 0
From: Austin, TX
did you pull the strut/spring assembly back out and double check the torque on the top nut?
 
Reply
Old Jun 6, 2012 | 08:33 PM
  #5  
minime331's Avatar
minime331
Thread Starter
|
2nd Gear
iTrader: (1)
Joined: Nov 2011
Posts: 143
Likes: 0
what size is the right bit that i need to use to drill out the stock metal sleeve so it fits the koni yellows?
 
Reply
Old Jun 7, 2012 | 06:22 AM
  #6  
blue2turbo's Avatar
blue2turbo
4th Gear
iTrader: (8)
Joined: Aug 2010
Posts: 531
Likes: 0
From: Austin, TX
Damn, I don't remember off the top of my head, I will see if I can find it online somewhere, but if not, I should still have the directions in the Koni box in my garage, I'll try to check tonight.

But the actual sleeve should be included with the Koni's. The only thing you shoud have to drill if is the upper mount hole and the washer...
 
Reply
Old Jun 7, 2012 | 05:25 PM
  #7  
minime331's Avatar
minime331
Thread Starter
|
2nd Gear
iTrader: (1)
Joined: Nov 2011
Posts: 143
Likes: 0
i got them used and it wasnt included so i am just going to drill the old one out
 
Reply
Old Jun 7, 2012 | 08:46 PM
  #8  
OldGameFreaK's Avatar
OldGameFreaK
4th Gear
iTrader: (1)
Joined: Feb 2011
Posts: 477
Likes: 2
From: Tempe, AZ
Check your rear swaybar busings. Mine are a bit sloppy and i get that kind of noise.
 
Reply
Old Jun 19, 2012 | 07:53 PM
  #9  
minime331's Avatar
minime331
Thread Starter
|
2nd Gear
iTrader: (1)
Joined: Nov 2011
Posts: 143
Likes: 0
so i found out yesterday what the clunking noise was. it was the tops of the piston hitting the inside of the wheel well. what could i do to fix this?
 
Reply
Old Jun 20, 2012 | 06:20 AM
  #10  
blue2turbo's Avatar
blue2turbo
4th Gear
iTrader: (8)
Joined: Aug 2010
Posts: 531
Likes: 0
From: Austin, TX
Im not tracking here... the top of what piston?
 
Reply
Old Jun 22, 2012 | 09:50 PM
  #11  
LAMARR -s53's Avatar
LAMARR -s53
3rd Gear
Joined: Sep 2011
Posts: 205
Likes: 0
From: FL 321
I'm having the same issue with my Hr,s coilovers.
 
Reply
Old Jun 22, 2012 | 09:52 PM
  #12  
LAMARR -s53's Avatar
LAMARR -s53
3rd Gear
Joined: Sep 2011
Posts: 205
Likes: 0
From: FL 321
Originally Posted by minime331
so i found out yesterday what the clunking noise was. it was the tops of the piston hitting the inside of the wheel well. what could i do to fix this?
U mean the center nut. Hitting the frame. Inside the wheel well.? Wonder if thats what is hitting mine.
 
Reply
Old Jun 23, 2012 | 10:51 PM
  #13  
minime331's Avatar
minime331
Thread Starter
|
2nd Gear
iTrader: (1)
Joined: Nov 2011
Posts: 143
Likes: 0
Originally Posted by LAMARR -s53
U mean the center nut. Hitting the frame. Inside the wheel well.? Wonder if thats what is hitting mine.
yes thats what i meant

i found out that i added two washers on to the circlip and tighten the top bolt down it will hold the rod in place just need to do a little tweaking tomorrow to put the last nail in to the casket and be done with this mess. on the good hand i know how to take the rear suspension out as quick as possible and but it back together in no time
 
Reply
Old Jun 26, 2012 | 01:57 PM
  #14  
LAMARR -s53's Avatar
LAMARR -s53
3rd Gear
Joined: Sep 2011
Posts: 205
Likes: 0
From: FL 321
Originally Posted by minime331
yes thats what i meant

i found out that i added two washers on to the circlip and tighten the top bolt down it will hold the rod in place just need to do a little tweaking tomorrow to put the last nail in to the casket and be done with this mess. on the good hand i know how to take the rear suspension out as quick as possible and but it back together in no time

sounds like i will be doin the same thing this weekend ...
 
Reply
Old Jul 8, 2012 | 06:47 PM
  #15  
LAMARR -s53's Avatar
LAMARR -s53
3rd Gear
Joined: Sep 2011
Posts: 205
Likes: 0
From: FL 321
That wasn't the deal with mine , took out the coilovers and loosed the nut. Still.makes the noise grrr
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Getrieben
1st Gear
23
Sep 12, 2024 07:03 AM
Ryephile
Suspension
113
Feb 9, 2020 03:43 PM
maestro39
R50/R53 :: Hatch Talk (2002-2006)
3
Oct 27, 2015 02:38 PM
Mini'mon
MINI Parts for Sale
6
Aug 26, 2015 01:02 PM
iamcamkeenan
R50/R53 :: Hatch Talk (2002-2006)
3
Aug 10, 2015 03:31 PM




All times are GMT -7. The time now is 08:17 PM.