Hi all!

This wire is behind the intake manifold, i cant find where it hooks up.

Any ideas?

Also, on my oil filter housing, it looks like there should shoulplug hooked up to a sensor on it, but there is no plug in sight.

 

It's an 09 justa

 

That is just a retaining clip that hold the wire in place on the intake manifold...doesn't connect to anything!

 

It's a 2 wire connector with a brown end. Just like all the other 2 wire connectors. Probably not the best picture. I'll try and take another.

 

Sorry didn't see the connector

Check your valve cover vent hose and your fuel tank breather valve.
https://www.ecstuning.com/b-genuine-...v/13907624538/
https://www.ecstuning.com/b-genuine-...e/11157612996/

 

The valve cover vent hose has been deleted. Not sure why.

Where can o find the fuel tank breather valve?

 

 

If the vent hose is deleted it's likely that!!!
Breather Valve is below the intake manifold...think it is on a bracket on the back side of the block (if my old mind hasn't failed me)
What are the 2 wire colours?...can look it up.

 

I appreciate all the help!

The 2 wires are orange and black.

I will be picking up an exhaust manifold from a mini that's being parted out in a couple days. Perhaps I'll grab the hose so I can un delete the breather.

 

Does anybody have any ideas?