R56 base cranck but no start(good battery)

Reply Subscribe

Thread Tools

Search this Thread

Nov 9, 2018 | 10:33 PM

Tao

Thread Starter

1st Gear

Joined: Oct 2018

Posts: 15

Likes: 0

R56 base cranck but no start(good battery)

I recently replaced the thermostat housing on my r56 base model because of an overnight problem
when i replaced everything back the car crank but didn’t start
the battery was tested and delivering 12.68V and 613/620 CCA

Last edited by Tao; Nov 9, 2018 at 10:35 PM. Reason: DETAILS

Nov 10, 2018 | 03:38 AM

MiniToBe

6th Gear

iTrader: (2)

Joined: Jan 2015

Posts: 4,339

Likes: 437

From: Philadelphia PA

It felt like it wanted to start...tracebback what you did and make sure all connectors are right and pluged in and grounds are connected too.
Also, get an obd reading.

Nov 10, 2018 | 10:38 AM

Tao

Thread Starter

1st Gear

Joined: Oct 2018

Posts: 15

Likes: 0

This is the results of obd test

Nov 10, 2018 | 11:49 AM

MiniToBe

6th Gear

iTrader: (2)

Joined: Jan 2015

Posts: 4,339

Likes: 437

From: Philadelphia PA

Did clear the codes any these popped again? If so, check the MAF sensor and the MAP sensor on the intake manifold. Check the pins of these sensor to make sure they weren't bent.

Nov 11, 2018 | 12:04 PM

Tao

Thread Starter

1st Gear

Joined: Oct 2018

Posts: 15

Likes: 0

Quote:

Originally Posted by MiniToBe

Did clear the codes any these popped again? If so, check the MAF sensor and the MAP sensor on the intake manifold. Check the pins of these sensor to make sure they weren't bent.

Just verified but no results
Map and maf seems to be wired correctly