Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Clubman (R55), Cooper and Cooper S(R56), and Cabrio (R57).

Please Help, CEL Codes, Limp Mode

Thread Tools
 
Search this Thread
 
Old Dec 17, 2012 | 01:42 PM
  #1  
teleautomata's Avatar
teleautomata
Thread Starter
|
1st Gear
Joined: Oct 2005
Posts: 28
Likes: 0
Please Help, CEL Codes, Limp Mode

Hi,

I just got the following codes:

P0300
P0301
P0302
P0303
P1497
P013A

The car is a 07' R56. The car just suddenly went into limp mode on the highway. Can someone help me with a checklist of things I should look at first before taking it to the dealer?

Thanks.
 
Reply
Old Dec 17, 2012 | 02:00 PM
  #2  
alexs3d2's Avatar
alexs3d2
4th Gear
Joined: Jan 2011
Posts: 393
Likes: 6
The P03xx codes mean you have misfires in the cylinders, the last number identifying the cylinder (in your case all 1+2+3 cylinders are misfiring).

P1497 reads downstream throttle air leak.

P013A: O2 Sensor slow response-Rich to Lean.

I think the two last errors are caused by the cylinders misfiring. The misfiring itself could be attributed to a number of reasons: faulty spark plugs, ignition coils or carbon buildup, fuel injection.

Since you are not listing any code related to the coils or fuel injection system, we can assume thse are fine. Also three spark plugs are unlikely to fail at the same time. That leaves carbon buildup as the most likely culprit, which is really difficult to self-diagnose.
 
Reply
Old Dec 17, 2012 | 02:08 PM
  #3  
alexs3d2's Avatar
alexs3d2
4th Gear
Joined: Jan 2011
Posts: 393
Likes: 6
PS; Reading this post you may perhaps have a cracked valve cover?
 
Reply
Old Dec 17, 2012 | 04:05 PM
  #4  
teleautomata's Avatar
teleautomata
Thread Starter
|
1st Gear
Joined: Oct 2005
Posts: 28
Likes: 0
Originally Posted by alexs3d2
PS; Reading this post you may perhaps have a cracked valve cover?
Thanks for the link. I'll look into that now.
 
Reply
Old Dec 18, 2012 | 04:35 PM
  #5  
teleautomata's Avatar
teleautomata
Thread Starter
|
1st Gear
Joined: Oct 2005
Posts: 28
Likes: 0
Did a compression test. Cylinder 1 has zero compression.
 
Reply
Old Dec 18, 2012 | 05:21 PM
  #6  
countryboyshane's Avatar
countryboyshane
6th Gear
iTrader: (9)
Joined: Feb 2009
Posts: 2,568
Likes: 8
From: Bloomfield, MI
As they say, "Well there's your problem!"

What are the results of the leakdown test? Hopefully your problem is in the top end of the engine *crossing fingers*
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thadscottmoore
R56 :: Hatch Talk (2007+)
13
Jun 4, 2021 07:19 AM
Steffen.Johnson
R50/R53 :: Hatch Talk (2002-2006)
71
Jan 26, 2021 09:11 AM
rob&JCW
R56 :: Hatch Talk (2007+)
4
Oct 9, 2015 11:12 AM
HogWldFLTR
F55/F56 :: Hatch Talk (2014+)
3
Sep 8, 2015 05:25 AM




All times are GMT -7. The time now is 05:30 AM.