BYOP Triangle Pulley Party Revived
#1
BYOP - Bring your own pulley!
We are on again for a pulley party on June 19 in the Triangle area.
I've got the tools... the puller and tensioner tool.
and the experience. (See my install photos)
I've got 3000 miles on my pulley install with no problems. It performed well for the Phil Wick Driving School and Dragon '04.
If you are interested, order your pulley and belt from Helix13.com, or the Alta pulley from your favorite place.
I am willing to help up to 6 people on this day. Two spots are already taken.
#1 Gunner
#2 Grant
#3 Pebblecrusher
#4 Audioman
#5 LeeL
#6 open
I anticipate about 1 1/2 hours per car. My car took a little longer than that, but it was my 1st time.
We should be able to have more than 1 car going at a time, but we will need extra floor jacks to do that.
Please post or PM me to RSVP and for directions
Disclaimer - This may or may not void your warranty. That seems to be dealer and situation dependent.
_________________
Chris Suich
Apex, NC
'03 MCS LY/Black
Born 09/30/02
We are on again for a pulley party on June 19 in the Triangle area.
I've got the tools... the puller and tensioner tool.
and the experience. (See my install photos)
I've got 3000 miles on my pulley install with no problems. It performed well for the Phil Wick Driving School and Dragon '04.
If you are interested, order your pulley and belt from Helix13.com, or the Alta pulley from your favorite place.
I am willing to help up to 6 people on this day. Two spots are already taken.
#1 Gunner
#2 Grant
#3 Pebblecrusher
#4 Audioman
#5 LeeL
#6 open
I anticipate about 1 1/2 hours per car. My car took a little longer than that, but it was my 1st time.
We should be able to have more than 1 car going at a time, but we will need extra floor jacks to do that.
Please post or PM me to RSVP and for directions
Disclaimer - This may or may not void your warranty. That seems to be dealer and situation dependent.
_________________
Chris Suich
Apex, NC
'03 MCS LY/Black
Born 09/30/02
Last edited by Mini03Tiger84; 06-09-2004 at 05:09 PM.
#2
I am very interested, and looking at purchasing a pulley right now. Though I am having trouble deciding on a pulley.
Helix 13's Pulley - MCS 15% Supercharger Pulley $100.00
MINI Madness' Pulley - $150
Alta pulley from Out Motoring - $124.95
3 pulleys, not all the same.
Edit:
You mention Helix13 and Alta, but what about ProMINI? Looks like the same design and install.
_________________
Torrun Dearg
'04 CR/B MCS, T/B interior, Premium, Sport, Cold
5 Brake Lights... more mods to come.
Helix 13's Pulley - MCS 15% Supercharger Pulley $100.00
MINI Madness' Pulley - $150
Alta pulley from Out Motoring - $124.95
3 pulleys, not all the same.
Edit:
You mention Helix13 and Alta, but what about ProMINI? Looks like the same design and install.
_________________
Torrun Dearg
'04 CR/B MCS, T/B interior, Premium, Sport, Cold
5 Brake Lights... more mods to come.
#3
>>Edit:
>>You mention Helix13 and Alta, but what about ProMINI? Looks like the same design and install.
>>
>>_________________
>>Torrun Dearg
>>'04 CR/B MCS, T/B interior, Premium, Sport, Cold
>>5 Brake Lights... more mods to come.
Pebblecrusher,
First and important, the $100 15% from Helix I believe is NOT the 2 piece self-centering. You want the $120 15% version. Much easier to install.
The ProMINI does look identical to what Eric at Helix sells, but more expensive than Helix. I paid $120 for 19% plus belt and shipping from Helix. I would guess the same supplier. All else being equal, I would recoomend Helix... He has been fair and provided much advice during my decision and install.
The Alta I have read has been another popular brand but is not available in 19%.
Hope this helps.
>>You mention Helix13 and Alta, but what about ProMINI? Looks like the same design and install.
>>
>>_________________
>>Torrun Dearg
>>'04 CR/B MCS, T/B interior, Premium, Sport, Cold
>>5 Brake Lights... more mods to come.
Pebblecrusher,
First and important, the $100 15% from Helix I believe is NOT the 2 piece self-centering. You want the $120 15% version. Much easier to install.
The ProMINI does look identical to what Eric at Helix sells, but more expensive than Helix. I paid $120 for 19% plus belt and shipping from Helix. I would guess the same supplier. All else being equal, I would recoomend Helix... He has been fair and provided much advice during my decision and install.
The Alta I have read has been another popular brand but is not available in 19%.
Hope this helps.
#4
#5
>>So you are suggesting the clamp on ones? Or does Helix not have the self centering 15% listed? I'll give them a buzz tomorrow. I'll most likely be getting one. I'll confirm very soon, so save me a spot. Looking very good.
The clamp-on is the self-centering one. Self-centering refers to alignment for the belt. His term for clamp refers to the outer pulley squeezing/clamping the tapered inner piece on the shaft.
The clamp-on is the self-centering one. Self-centering refers to alignment for the belt. His term for clamp refers to the outer pulley squeezing/clamping the tapered inner piece on the shaft.
#6
OK Chris,
I'll take a spot. I think my MINI is ready for it. I'm ordering from Helix today, just need to decide on the reduction amount. I'm going to order a short shifter from them as well and if time allows or all the spots don't get filled, maybe we could do that as well.
I've also got a floor jack, jack stands and a torque wrench I can bring to get more than 1 vehicle going at a time.
Keith
I'll take a spot. I think my MINI is ready for it. I'm ordering from Helix today, just need to decide on the reduction amount. I'm going to order a short shifter from them as well and if time allows or all the spots don't get filled, maybe we could do that as well.
I've also got a floor jack, jack stands and a torque wrench I can bring to get more than 1 vehicle going at a time.
Keith
#7
Trending Topics
#8
I'll be ordering my pulley next week. Bonus check comes in then, so I can't order till then. :smile: So consider a spot filled. :smile:
Gives me a week to figure out which % to get.
Edit:
PM me with some directions. Coming from near Charlotte, but used to live in Raleigh so I am fairly familiar with the roads around there.
_________________
Torrun Dearg
'04 CR/B MCS, T/B interior, Premium, Sport, Cold
5 Brake Lights... more mods to come.
Gives me a week to figure out which % to get.
Edit:
PM me with some directions. Coming from near Charlotte, but used to live in Raleigh so I am fairly familiar with the roads around there.
_________________
Torrun Dearg
'04 CR/B MCS, T/B interior, Premium, Sport, Cold
5 Brake Lights... more mods to come.
#11
#12
Originally Posted by LeeL
Please put me down for one of the afternoon slots. I'll order my pulley today.
I also have an el cheapo rolling floor jack you can if you would like. If I can;t be there all day I can just bring it by in the AM.
Thanks
Lee
I also have an el cheapo rolling floor jack you can if you would like. If I can;t be there all day I can just bring it by in the AM.
Thanks
Lee
#16
Once again... Thanks Chris! The drive home was great! No problems, though I think I felt a bit more vibration from the gas peddle and the RPMS were not as high as I am used to them. Not problems, just differences.
Otherwise things are really cool. I will be getting a hold of Helix just to be sure about that pulley. Probably just cosmetic, but I have to be sure.
Otherwise things are really cool. I will be getting a hold of Helix just to be sure about that pulley. Probably just cosmetic, but I have to be sure.
#17
#18
#20
Thread
Thread Starter
Forum
Replies
Last Post
fkrowland
R50/R53 :: Hatch Talk (2002-2006)
5
09-30-2015 10:30 AM
daviday
R50/R53 :: Hatch Talk (2002-2006)
1
09-25-2015 01:31 AM