Drivetrain NM Power Module Issue

Thread Tools
 
Search this Thread
 
  #1  
Old 03-27-2018, 05:52 PM
Stump Grinder's Avatar
Stump Grinder
Stump Grinder is offline
1st Gear
Thread Starter
Join Date: Jan 2018
Posts: 38
Likes: 0
Received 2 Likes on 2 Posts
NM Power Module Issue

Hi All,

Took the plunge and bought a NM Power Module, for my 2012 Countryman ALL4 S (R60) directly from NM Engineering, first start after fitment (couple of hours ago) I have a check engine light, I drove the car for about 25 miles in order that the ECU could recognise it had more boost but the car is like a slug, won't rev past 3500 in 6th gear and just unresponsive in any gear. I returned to standard set up and the car is back to it's normal sprightly self but the CEL light is still on - any help / advice much appreciated.

I have Ultra 94 gas (102 RON) available so I went straight to the high setting.
 
  #2  
Old 03-27-2018, 05:56 PM
vetsvette's Avatar
vetsvette
vetsvette is offline
Moderator
iTrader: (5)
Join Date: Oct 2013
Location: South Central Virginia
Posts: 3,896
Received 450 Likes on 343 Posts
You might try it on the low setting. I ran one on my F56 for two years without a problem. It's a different part from the 2nd Gen though. You can always give Jerry at NM a call.
 
  #3  
Old 03-27-2018, 05:57 PM
Stump Grinder's Avatar
Stump Grinder
Stump Grinder is offline
1st Gear
Thread Starter
Join Date: Jan 2018
Posts: 38
Likes: 0
Received 2 Likes on 2 Posts
Hi, yep will give the low setting a go tomorrow and I've emailed NM - thanks.
 
  #4  
Old 03-27-2018, 05:58 PM
Minnie.the.Moocher's Avatar
Minnie.the.Moocher
Minnie.the.Moocher is offline
OVERDRIVE
Join Date: Jun 2014
Location: earth PNW
Posts: 5,390
Received 570 Likes on 486 Posts
Many of those devices require letting the car power down. Hood/doors open for 10 minutes or so and key out of the area. That can cause issues if you didn't do that, although quickly looking at the install directions doesn't show that. You could also have a faulty unit or didn't fully seat the connector. Do you have an OBD reader to look at the engine fault codes?
 
  #5  
Old 03-27-2018, 06:00 PM
Stump Grinder's Avatar
Stump Grinder
Stump Grinder is offline
1st Gear
Thread Starter
Join Date: Jan 2018
Posts: 38
Likes: 0
Received 2 Likes on 2 Posts
Hi MtM, instructions require engine off for 30 mins before fitment, that was observed (at least 30 mins), I don't have an OBD but a neighbor has so I'll look at the codes tomorrow.
 
  #6  
Old 03-28-2018, 02:34 PM
Stump Grinder's Avatar
Stump Grinder
Stump Grinder is offline
1st Gear
Thread Starter
Join Date: Jan 2018
Posts: 38
Likes: 0
Received 2 Likes on 2 Posts
CEL cleared itself, will try again tonight on lower settings, not happy though if that's all I can expect and will probably return it, no response from NM engineering as yet.

I was so looking forward to the improvements, quite disappointed that it's not as advertised (so far).
 
  #7  
Old 03-28-2018, 04:19 PM
SFMCS's Avatar
SFMCS
SFMCS is offline
4th Gear
Join Date: Nov 2016
Location: Rocky Mntn High Desert
Posts: 385
Received 80 Likes on 66 Posts
Have you run your tank clean with the Ultra 94 before you set it to high? NM has been good to me-just replaced harness plug out of warranty-no charge.
 
  #8  
Old 03-28-2018, 04:37 PM
Stump Grinder's Avatar
Stump Grinder
Stump Grinder is offline
1st Gear
Thread Starter
Join Date: Jan 2018
Posts: 38
Likes: 0
Received 2 Likes on 2 Posts
I am such a putz, just re-checked the install and believe it or not it is possible to install the boost sensor flying lead upside down, fixed and oh my, what a transformation. My next upgrade is going to be adult size incontinence pants as I just about managed to not wet myself laughing, I can't guarantee that I'll stay dry much longer, grin factor well and truly restored.

Hats off to NM and their wicked little module.
 
The following users liked this post:
vetsvette (03-29-2018)
  #9  
Old 03-28-2018, 04:58 PM
Minnie.the.Moocher's Avatar
Minnie.the.Moocher
Minnie.the.Moocher is offline
OVERDRIVE
Join Date: Jun 2014
Location: earth PNW
Posts: 5,390
Received 570 Likes on 486 Posts
At least you get a gold star for the use of the word "putz". I remember meeting a guy who's last name was putz, hard to keep a straight face when first talking to him. And yes he was.

Glad you are running well! Enjoy.
 
  #10  
Old 03-29-2018, 07:07 AM
Stump Grinder's Avatar
Stump Grinder
Stump Grinder is offline
1st Gear
Thread Starter
Join Date: Jan 2018
Posts: 38
Likes: 0
Received 2 Likes on 2 Posts
To be honest my main reason to purchase was to try and realise some efficiency improvements, I regularly get 43mpg on my commute, this morning I averaged 48mpg :-), no change in driving style/speed etc.
 
  #11  
Old 03-19-2019, 08:44 AM
Kevinp_27's Avatar
Kevinp_27
Kevinp_27 is offline
2nd Gear
Join Date: Jan 2018
Location: SF Bay Area
Posts: 137
Received 8 Likes on 8 Posts
Originally Posted by Minnie.the.Moocher
At least you get a gold star for the use of the word "putz". I remember meeting a guy who's last name was putz, hard to keep a straight face when first talking to him. And yes he was.

Glad you are running well! Enjoy.
lol sorry to revive an old thread but my last name is Putz too
 
  #12  
Old 03-19-2019, 09:47 AM
Minnie.the.Moocher's Avatar
Minnie.the.Moocher
Minnie.the.Moocher is offline
OVERDRIVE
Join Date: Jun 2014
Location: earth PNW
Posts: 5,390
Received 570 Likes on 486 Posts
Originally Posted by Kevinp_27
lol sorry to revive an old thread but my last name is Putz too
I don't normally toss out insults. You don't seem to be offended but I'll apologize anyway.
 
  #13  
Old 03-19-2019, 09:51 AM
Kevinp_27's Avatar
Kevinp_27
Kevinp_27 is offline
2nd Gear
Join Date: Jan 2018
Location: SF Bay Area
Posts: 137
Received 8 Likes on 8 Posts
Originally Posted by Minnie.the.Moocher
I don't normally toss out insults. You don't seem to be offended but I'll apologize anyway.
haha no need to apologize! i find it quite funny
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bubbasky
MINI Parts for Sale
0
03-18-2018 01:39 PM
ti22fjc
R50/R53 :: Hatch Talk (2002-2006)
5
12-02-2013 03:07 AM
phong
Stock Problems/Issues
5
07-31-2011 03:17 PM
haulin_oats
Navigation & Audio
7
05-11-2005 08:20 AM
GreyStreet
Navigation & Audio
1
10-25-2004 05:03 PM



Quick Reply: Drivetrain NM Power Module Issue



All times are GMT -7. The time now is 06:07 PM.