R56 Vacuum pump plastic clamp

Reply Subscribe

Thread Tools

Search this Thread

Jul 4, 2019 | 01:29 PM

Jcrowsom

Thread Starter

1st Gear

Joined: Jul 2018

Posts: 34

Likes: 0

From: Las Vegas

Vacuum pump plastic clamp

Hello everyone.

I have a 2011 MCS and the black nipple on the vacuum pump that the vacuum hose locks onto broke today. Is the plastic piece replaceable? There is a torx screw holding the piece to the pump. If not i am not looking forward to replacing the whole pump for $400.
Thank you for all your help.

Jul 5, 2019 | 07:08 AM

Yupetc

4th Gear

Joined: Jan 2018

Posts: 483

Likes: 146

I don't think there are any supplier who carries the nipple itself, but if you go hunting for it from junk yards or someone from the forum who may have an extra bad pump hanging around, then yes, you can replace just the nipple and get through the day.

Jul 5, 2019 | 07:53 AM

Jcrowsom

Thread Starter

1st Gear

Joined: Jul 2018

Posts: 34

Likes: 0

From: Las Vegas

Thank you. That is what I figured. I wish they sold just the check valve.

Jul 15, 2019 | 07:56 AM

ECSTuning

Platinum Sponsor

Joined: Jan 2013

Posts: 36,737

Likes: 2,540

From: Wadsworth, Ohio

Yep its the main part:

Thats an N14 one. 2007-2010 MCS, 2009-2012 MINI JCW.

https://www.northamericanmotoring.co...en-nozzle.html

Here is the N18 one( Your MINI 2011+ MCS). It has a little different design on that part so i dont this the end would cross over. The pump are different overall Sorry i could not get that part separately.

https://www.ecstuning.com/b-genuine-...p/11667586424/