R52 :: Cabrio Talk (2005-2008) Cooper and Cooper S convertible (R52) discussion.

R52 Center Arm Rest

Thread Tools
 
Search this Thread
 
Old Sep 1, 2011 | 07:48 AM
  #1  
pkars's Avatar
pkars
Thread Starter
|
1st Gear
Joined: Aug 2011
Posts: 21
Likes: 0
Center Arm Rest

My armrest top keeps moving/sliding in my 2006 Conv. S. Very annoying. Any ideas to correct or retrofit?
 
Reply
Old Sep 1, 2011 | 10:27 AM
  #2  
Fly'n Brick's Avatar
Fly'n Brick
6th Gear
15 Year Member
Joined: Oct 2008
Posts: 4,965
Likes: 393
From: In the here and now, for now.
Mine too, the cheezie little plastic tab that's supposed to hold it shut broke off very early in the game. Short of removing the dang thing, I've put double sided tape along the inside near the slide rail leaving the backing on the exposed part. It still slides back a little but I've gotten in the habit of bumping it forward with my elbow the minute I sit down.

Acknowledging that everybody has an opinion and only one can win out, the design team on that armrest gave up too easily...in my opinion.
 
Reply
Old Sep 1, 2011 | 10:30 AM
  #3  
AXO's Avatar
AXO
5th Gear
Joined: Oct 2010
Posts: 637
Likes: 0
From: Wellington, Florida
My 08 MCS has always done the same thing. I have even been tempted to remove it. It Suxs ever time you shift the lid slides back! I have searched for a fix, but could not locate one. Some have had it replaced under warranty, but in a short time it starts sliding back again.
 
Reply
Old Sep 1, 2011 | 11:20 AM
  #4  
wandrur's Avatar
wandrur
Moderator
Joined: Jul 2008
Posts: 11,899
Likes: 2
From: Fredericksburg, VA
I *hate* that armrest. I have it in my new MCS. I had the flip top one in my old MCS. I may have to pay the dealer to swap the thing, because I've only had the new one for TWO days, and it drives me batty.
 
Reply
Old Sep 1, 2011 | 01:10 PM
  #5  
MSMiniMan's Avatar
MSMiniMan
1st Gear
Joined: Jul 2011
Posts: 13
Likes: 0
From: Mccordsville, IN
Originally Posted by pkars
My armrest top keeps moving/sliding in my 2006 Conv. S. Very annoying. Any ideas to correct or retrofit?

Use Velcro to keep it closed and that way its still functional. I hate the plastic clip all the automakers are going to these days. 2011 BMW Auto Repair Mechanic Hillsboro Oregon
 

Last edited by MSMiniMan; Dec 8, 2011 at 05:35 PM.
Reply
Old Sep 3, 2011 | 08:46 PM
  #6  
rcmpdx's Avatar
rcmpdx
Neutral
Joined: Dec 2010
Posts: 2
Likes: 0
I love having the armrest, but hated the sliding so I superglued mine shut. Problem solved. It really didn't have much storage room anyway.
 
Reply
Old Sep 6, 2011 | 12:20 PM
  #7  
CoopersGuy's Avatar
CoopersGuy
2nd Gear
iTrader: (5)
Joined: Dec 2009
Posts: 108
Likes: 0
I had the same problem with my 05 hatch and I also put some adhesive felt on the silver rail so the friction of the top would keep it from moving but not keep it from functioning. My armrest was a love / hate relationship to say the least. I loved the bit of storage as these cars have none but I hated the sliding top, the fact that not much would fit in the rear cup holder and the fact that when in the up position it was not up enough. My R52 did not come with one so I am a happy camper and don't miss the storage that much and the other problems at all.
 
Reply
Old Sep 13, 2011 | 04:32 PM
  #8  
shrimpy
1st Gear
Joined: Jan 2011
Posts: 50
Likes: 1
5 minute epoxy solved this issue. You loose the storage but really, what can you store in there anyway ....
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
28
Dec 23, 2015 10:36 AM
joedotmac
R56 :: Hatch Talk (2007+)
8
Aug 28, 2015 01:04 PM
ECSTuning
Vendor Announcements
0
Aug 25, 2015 07:11 AM
Powershift
MINIs & Minis for Sale
1
Aug 16, 2015 05:14 PM
Dashdog
MINIs & Minis for Sale
0
Aug 10, 2015 06:17 AM




All times are GMT -7. The time now is 01:39 AM.