Morning, MY R50 has a build date of January 2022. I Purchased the Icarsoft CR Pro in the hopes of being able to check the issue and reset the airbag light. despite what the software sales pitch says, the menu on the CR Pro does not show an option to do this. No ACSM, NO Airbag module.
Anyone else have this issue and is there any other options to clear this light without going to a dealership?

Thanks

 

There is always other options, depends how much time your willing to invest here. Apparently INPA can clear an airbag light from a light reading i've done. I would also have to assume ISTA can deal with this issue as well.

INPA is a lot easier to get running than ISTA, i would suggest working with INPA, if unsuccessful i would move to ISTA. Tons of information online regarding this software in forums, even youtube videos. Its not hard but takes time to setup correctly talking with the vehicle. A quick reference link below, best of luck!

https://www.northamericanmotoring.co...ml#post4450602

 

yes inpa does it.

see my thread named "inpa", post #16 has all you will need

 

B800 SRS scanner cleared the code and advised what the issue might have been. We will see if it returns.
thanks