R50/53 Maintenance
Mar 16, 2021 | 11:50 AM
Thread Starter
|
1st Gear
Joined: Jan 2004
Posts: 20
Likes: 0
From: Pacific Northwest
Maintenance
Hello,
I will be removing my subframe to change the lower control arm bushing plus power steering pressure hose. Is there anything else I should change while I have the subframe down?
Thank you in advance
Mar 16, 2021 | 12:04 PM
Joined: Jun 2009
Posts: 1,314
Likes: 484
From: Atlanta, GA
The sway bar and steering rack bushings are really only accessible with the subframe out.
Mar 16, 2021 | 12:29 PM
Thread Starter
|
1st Gear
Joined: Jan 2004
Posts: 20
Likes: 0
From: Pacific Northwest
Thanks, deepgrey
I will change out the bushing
Mar 16, 2021 | 06:24 PM
Joined: Sep 2012
Posts: 938
Likes: 127
I would replace the inner ball joints, steering rack bushing, and sway bar bushings in addition to the control arm bushings.
Mar 17, 2021 | 07:27 AM
Thread Starter
|
1st Gear
Joined: Jan 2004
Posts: 20
Likes: 0
From: Pacific Northwest
Thanks for the suggestion Racinguy04
Mar 21, 2021 | 07:18 PM
Joined: Feb 2018
Posts: 1,734
Likes: 328
All bushings and ball joints for sure.
maybe the oil filter housing gasket? I can’t remember now if that is easier with the subframe out, I’d think so.
good time to do tie rods also if you need them
Mar 23, 2021 | 11:37 AM
Thread Starter
|
1st Gear
Joined: Jan 2004
Posts: 20
Likes: 0
From: Pacific Northwest
Thanks, ssoliman
I will add oil filter housing gasket to my list
Mar 23, 2021 | 06:38 PM
Joined: Oct 2019
Posts: 268
Likes: 58
From: Southern GA
Quote:
Originally Posted by
ssoliman
All bushings and ball joints for sure.
maybe the oil filter housing gasket? I can’t remember now if that is easier with the subframe out, I’d think so.
good time to do tie rods also if you need them
Correct me if I'm wrong here. Can't this be done without dropping the SF? I only ask because I'm about to do mine as well
Mar 24, 2021 | 11:39 AM
Thread Starter
|
1st Gear
Joined: Jan 2004
Posts: 20
Likes: 0
From: Pacific Northwest
Quote:
Originally Posted by
Mini Devil
Correct me if I'm wrong here. Can't this be done without dropping the SF? I only ask because I'm about to do mine as well
I believe you can do it without drop the SF. Have you see this video before ..........
Mar 25, 2021 | 06:33 AM
Joined: Oct 2019
Posts: 268
Likes: 58
From: Southern GA
Quote:
Originally Posted by
MyminicooperS
I've done my oil cooler already, without dropping the SF. I was referring to the tie rods
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kitchenboy
MINI Parts for Sale
0
Mar 21, 2020 06:14 PM
jamfred774
Stock Problems/Issues
3
Sep 26, 2014 06:01 AM
Patas
R50/R53 :: Hatch Talk (2002-2006)
13
Jun 27, 2014 01:48 PM
Drunktank
R50/R53 :: Hatch Talk (2002-2006)
3
Jan 3, 2013 08:58 PM
meb
Suspension
16
Oct 26, 2009 08:55 PM