R50/53 Engine bay degreasing
#1
Engine bay degreasing
I'm about to degrease and clean up my engine bay. I'm wondering if there any areas I should be careful around or put a plastic bag over. Taking a look around, there doesn't appear to be anything that could be damaged from the degreaser/water. Just want to be sure I'm not about to soak something exposed I can't see from the top.
#2
Some good info in this NAM thread here and some more for suggestions to watch out for here. Some good info on products here as well with my suggestion of the In & Out Spray.
__________________
Your Trusted Source For DIY and Parts
FREE SHIPPING over $99 click here
MINI Parts | DIY Help | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
FREE SHIPPING over $99 click here
MINI Parts | DIY Help | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
#3
Please watch the engine bay electrical, take your time, if you do pressure wash, you have to be very very careful. I would not do that unless you done it before. If you can get a small brush it helps.
Get some good cleaner: Chemical guys
https://www.ecstuning.com/Search/Sit...Chemical_Guys/
Or Sonax
https://www.ecstuning.com/Search/SiteSearch/Sonax/
Get some good cleaner: Chemical guys
https://www.ecstuning.com/Search/Sit...Chemical_Guys/
Or Sonax
https://www.ecstuning.com/Search/SiteSearch/Sonax/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
laneess
R56 :: Hatch Talk (2007+)
20
03-15-2016 12:35 PM