R50/R53 :: Hatch Talk (2002-2006) Cooper (R50) and Cooper S (R53) hatchback discussion.

R50/53 Please help identify mystery leftover bolt

Thread Tools
 
Search this Thread
 
Old Sep 15, 2013 | 01:03 PM
  #1  
mapetitevoiture's Avatar
mapetitevoiture
Thread Starter
|
Neutral
Joined: Feb 2012
Posts: 4
Likes: 0
From: Heber Springs, Arkansas
Please help identify mystery leftover bolt

Ok, just because some of you might need a good laugh and others have done it before. It has been a long time since this happened to me! Just finished reassembling my r53; did supercharger oil change, put on new idler, belt tensioner, thermostat, water pump, crank sensor seal, hoses, 15% pulley, cooler plugs, trans oil changed again...and just about to put the bumper skin on when I see....a bolt. It's a 13mm head with a shoulder before the threads; and it's only one bolt but I can't seem to remember what it went to. It is a clean bolt, so I know it wasn't behind the s/c or anywhere there, as everything was covered in blacknastygoo. Anybody recognize this bolt? It is easier to ask than to start taking apart again. I was just bragging to myself; car started/ran great/didn't leak/didn't rattle. And then this bolt! Thanks for any help!
 
Attached Thumbnails Please help identify mystery leftover bolt-000mystery-bolt.jpg  

Last edited by mapetitevoiture; Sep 15, 2013 at 01:13 PM. Reason: added picture
Reply
Old Sep 15, 2013 | 02:53 PM
  #2  
element's Avatar
element
3rd Gear
Joined: May 2003
Posts: 252
Likes: 0
From: Seattle, USA
looks like the bolt that holds on the black plastic air horn.. it goes onto the SC intake at the bottom of the SC. I just reinstalled that one on my clutch job


phil.
 
Reply
Old Sep 15, 2013 | 03:34 PM
  #3  
mapetitevoiture's Avatar
mapetitevoiture
Thread Starter
|
Neutral
Joined: Feb 2012
Posts: 4
Likes: 0
From: Heber Springs, Arkansas
Phil, do you mean the one right on the front of the air horn/intake, where the black plastic has a slotted kind of hole and a bolt goes into the supercharger to hold the air horn to it? if so, nope it isn't that one-too big, and I know I put that one back. It's also too clean to be from there, as everything there was black. Any other thoughts?
 
Reply
Old Sep 15, 2013 | 03:52 PM
  #4  
ACallahan's Avatar
ACallahan
5th Gear
iTrader: (6)
Joined: Dec 2009
Posts: 1,046
Likes: 4
From: Florida
Got all the thermostat housing screws in ? also seems to me there was a wire harness like bracket near the thermostat that may have had a bolt like that holding it down.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NYMADMINI
Drivetrain (Cooper S)
13
Dec 14, 2016 02:33 PM
buggyeye401
Stock Problems/Issues
6
Oct 1, 2015 01:22 PM
buggyeye401
Stock Problems/Issues
0
Sep 28, 2015 04:09 PM
EVMini
R56 :: Hatch Talk (2007+)
4
Sep 28, 2015 10:20 AM
daviday
R50/R53 :: Hatch Talk (2002-2006)
1
Sep 25, 2015 01:31 AM




All times are GMT -7. The time now is 08:51 PM.